Музыкальные центры Sven PS-720 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Party Speaker System with
Bluetooth and FM-radio
ENG
18
Radio mode
Attention! To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack
cable (included) to the AUX input
c
.
•
Turn on the speaker system – press button МODE
k
several times until the display shows the
station frequency. Long-term pressing button
l
activates auto search mode. After scanning
completion, the ଞrst scanned radio station will start to operate automatically. With buttons
r
and
t
select a desired radio station.
Player mode
Attention! The 컙le system of a micro SD carrier is FAT32. Maximum volume is 32 GB.
It is not recommended to use the micro SD Ultra Speed.
•
The system will enter the Player mode automatically when a carrier (USB flash or SD card) is
connected to corresponding ports. Use button
l
to switch between Play/Pause modes. You can
control tracks by using buttons
r
(previous track) and
t
(next track).
The use in the wired mode (LINE IN)
•
Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm
output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX
c
. Turn the
speakers to the LINE IN mode – press the MODE button
k
several times until «LINE» appears on the
display.
Connecting an additional speaker
For models PS-720/PS-750 you can connect an additional speaker (Bluetooth mode only):
•
Turn both speakers into Bluetooth mode.
•
Connect the signal source to one of the speakers via Bluetooth (the second column should be in
search mode).
•
On another speaker press and hold button DEL(TWS)
u
.
•
If two speakers are successfully connected between themselves, the inscription TWS will glow
constantly.
Reset
To reset the settings, long press the EQ button until
«
RES
»
appears. Then press button
h
on the
RC or button
l
on the front panel. Settings will reset.