Sven АС PS-800 - Инструкция по эксплуатации - Страница 6

Музыкальные центры Sven АС PS-800 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 16
Загружаем инструкцию
background image

ENG

6

Party Speaker System 

with Bluetooth and FM-radio

The system will enter the Player mode automatically when a carrier (USB flash or SD card) is con

-

nected to corresponding ports. Use button 

o

 to switch between Play/Pause modes. You can control 

tracks by using buttons 

l

 (previous track) and 

q

 (next track).The use in the wired mode (LINE IN).

• 

Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm 

output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX 

f

. Turn 

the speakers to the LINE IN mode — press the MODE button 

k

 several times until “LINE” appears 

on the display.

Connecting an additional speaker

For model PS-800 you can connect an additional speaker.

• 

For TWS connection in Bluetooth mode:

 

Turn both speakers into Bluetooth mode (both speakers should be in search mode).

 

On another speaker press and hold button MENU 

p

 on control panel or TWS button 

f

 

on Remote control.

 

If two speakers are successfully connected between themselves, the master unit will display 

“BLUE” constantly, the slave unit will display “SLAU”.

 

Connect the signal source via Bluetooth. Both speakers will appear in the search list as one 

device.

• 

For connection in other modes (FM radio/Player/LINE IN):

 

on any speaker, press and hold the MENU button 

p

 on the control panel or the TWS button 

f

 on the remote control.

 

If two speakers are successfully connected to each other, the operating mode will be displayed 

on the master device, and “SLAU” will be displayed on the slave device.

Reset

To reset the settings, long press the RESET 

n

 on remote control. Settings will reset.

TECHNICAL SPECIFICATIONS

Parameter, measurement unit

Value

Frequency response, Hz

40–22 000

Output power (RMS), W 

100 (2 × 50)

Speaker diameter, mm

Ø 38 + Ø 145

Battery capacity, mA*h

4 400 (2 pcs)

Power supply, V

~230/50 

, 9V/1.5A

Weight, g

5 200

Dimensions, mm 

312 × 325 × 568

Notes. Technical specifications given in this table are supplemental information and cannot give 

occasion to claims. Technical specifications and package contents are subject to change without 

notice due to the improvement of SVEN production.

Technical support is on www.sven.fi.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Sven АС PS-800?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"