Steba DD 3 Smar - Инструкция по эксплуатации - Страница 18

18

Getting started

1.  Put the food in the cooking pot. 

Please note that the filling level is between MIN and MAX and does not exceed 
or fall below them. 
Place the cooking pot in the device.

2.  Connect the device, 4 beeps can be heard and “OFF” appears on the display.
3.  Place the lid on the device and clos it according to the marking (No. 2) with a 

clockwise rotation. 

To open the lid after the end of the cooking process, the pressure 
release button No. 6 must be pressed. Do not use force to open the lid! 
If the automatic pressure release “AON” is selected, the pressure is 

released automatically after the end of the program.

4.  Select the desired automatic program with the rotary control No. 7. The corres-

ponding symbol flashes on the display and the basic cooking time is displayed. 
If the program is not changed within 10 seconds, the device starts the basic 
program.

5.  Changing cooking time / steam pressure 

After selecting the program, changes in time or pressure must be made within 
10 seconds. 
Press the timer / pressure button No. 5, the time flashes in the display. The time 
can be changed from 00:01 minutes to 04:00 hours using the rotary control. 
After 10 seconds the program starts with the changed time. 
If you also want to change the pressure, press button No. 5 a second time. Use 
the rotary control to select the desired pressure between 1.5 and 12 psi. The 
device starts automatically and shows the set values on the display. 

Note: The cooking time only begins to run as soon as the overpressure 
is reached. 

If you want to change the timer or the pressure during the cooking process, 
press button No. 5 and change the values as described above.