Vitek VT-8435 - Инструкция по эксплуатации - Страница 4

Мультистайлеры Vitek VT-8435 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

4

ENGLISH

Attention!  Do  not  allow  children  to  play 
with  polyethylene  bags  or  packaging  film. 
Danger of suffocation!

• 

Do  not  leave  children  unattended  to 
avoid them using the unit as a toy.

• 

Do not allow children to touch the oper-
ating  surface,  unit  body,  power  cord  or 
power plug during operation of the unit.

• 

Close  supervision  is  necessary  when 
children  or  people  with  disabilities  are 
near the operating unit.

• 

This  unit  is  not  intended  for  usage  by 
children.

• 

During  the  unit's  operation  and  breaks 
between operation cycles, keep the unit 
away from children.

• 

The  unit  is  not  intended  to  be  used  by 
people  with  physical,  sensory  or  men-
tal  disabilities  (including  children)  or  by 
persons  lacking  experience  or  knowl-
edge  if  they  are  not  under  supervision 
of  a  person  who  is  responsible  for  their 
safety  or  if  they  are  not  instructed  by 
this person on the usage of the unit.

• 

From time to time check the power cord 
integrity.

• 

Do  not  use  the  unit  if  the  power  cord 
or  the  power  plug  is  damaged,  if  the 
unit  works  improperly  and  after  it  was 
dropped.

• 

If the power cord is damaged, it should 
be  replaced  by  the  manufacturer,  a 
maintenance service or similar qualified 
personnel to avoid danger.

• 

Do  not  attempt  to  repair  the  unit  by 
yourself. Do not disassemble the unit by 
yourself,  if  any  malfunction  is  detected 
or  after  it  was  dropped,  unplug  the 
unit and contact any authorized service 
center at the contact addresses given in 
the warranty certificate and on the web-
site www.vitek.ru.

• 

To avoid damages, transport the unit in 
the original packaging only.

• 

Keep  the  unit  in  a  dry  cool  place  out  of 
reach  of  children  and  people  with  dis-
abilities.

THIS  UNIT  IS  INTENDED  FOR  HOUSE-
HOLD  USE  ONLY.  ITS  COMMERCIAL  US-
AGE AND USAGE IN PRODUCTION AREAS 
AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After  unit  transportation  or  storage 
under cold (winter) conditions, it is nec-
essary to keep it for at least three  hours 
at  room  temperature  before  switch-
ing on.

– 

Unpack  the  unit  and  remove  any  pack-
aging materials and advertising stickers 
preventing the unit operation.

– 

Check the unit for damages; do not use 
a damaged unit.

– 

Before switching the unit on, make sure 
that  your  home  mains  voltage  corre-
sponds to the unit operating voltage.

–  The  unit  is  intended  for  operation  with 

AC  system  and  50  or  60  Hz  frequency. 
The  unit  does  not  need  any  additional 
settings  for  operating  with  the  required 
nominal frequency.

USING THE MULTISTYLER

To get the best results, wash your hair with 
shampoo, wipe with a dry towel, dry with a 
hairdryer  and  comb  it.  After  that  you  can 
start straightening or styling your hair.

Hair straightening

– 

The  hair  straightener  can  be  used  to 
straighten both long and short hair.

– 

Use  the  hair  straightener  on  healthy 
undyed  and  unpermed  hair  or  use  it 
along  with  special  hair-straightening 
products.

– 

If  your  hair  has  already  been  dyed  or 
permed,  only  make  an  occasional  use 
of the straightener.

– 

For  the  best  results,  hair  should  be 
clean and dry.

– 

Open  the  unit,  to  do  this  slightly  press 
the  halves  of  the  unit  together,  set  the 
lock (6) to the vertical position.

– 

Set  the  operating  surfaces  (2)  to  the 
position  «

».  To  do  this,  press  on 

VT-8435_105 x148.indd   4

3/23/20   3:45 PM

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Vitek VT-8435?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"