Мойки высокого давления Lavor PREDATOR 160 WPS 8.101.0017C - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
24
CONTROL PANEL
⑱
Main switch 0/I
⑲
Soft wash (SOFT)
⑳
Medium wash (MEDIUM).
㉑
Hard wash (HARD).
Lights:
㉒
Child safety (orange).
㉓
Green LED.
㉔
Yellow LED.
㉕
Red LED.
㉖
Maintenance.
㉗
Power indicators ( SOFT, MEDIUM,
HARD).
㉘
Overheating.
Start-up
See the "INSTRUCTION MANUAL - SAFETY WARNINGS"
provided.
⑱
Start-up
(model- type: DIGIT)
- Insert the plug in the power outlet, the 0/I button
⑱
becomes blue.
- Press the gun lever until water comes out.
- Press the blue 0/I button
⑱
which becomes red.
⑲ ⑳ ㉑
Washing programs
- Each time the 0/I button
⑱
is turned on, the
machine starts with the SOFT wash program
⑲
.
- To change the program, press
MEDIUM ⑳
or
HARD ㉑
.
㉓
Green rectangular light
- The machine is on and working.
㉔
Yellow rectangular light
- The machine is in stand-by. To reactivate it, simply
press the gun lever.
㉕
Fixed red rectangular light
- Safety function. The electrical power supply is
deactivated because the machine has not been
used for more than 15 minutes (prolonged stand-
by). To turn the motor back on,
press the 0/I button
⑱
twice.
㉕
Flashing red rectangular light
- Safety function. The electrical power supply
to the motor is deactivated because of leaks in
the hydraulic circuit. To turn the motor back on,
press the 0/I button
⑱
twice. See the paragraph
“TROUBLESHOOTING”.
㉒
Child safety
- Press
SOFT ⑲
and
HARD ㉑
at the same time
for
⑳
seconds, until the Child safety symbol
㉒
flashes.
- The water jet does not come out even if the gun
lever is pressed; the buttons are locked too.
- To unlock the machine, repeat the operation.
㉖
Ordinary maintenance
The light
㉖
turns on after at least 10 hours
of operation. See the paragraph "Care and
Maintenance."
- Clean the filter in the water connection.
- Cleaning of nozzle. Use a small paper clip to free
foreign material clogging
or restricting spray tip.
- O-Ring Maintenance. The use of lubricant
(petroleum or synthetic grease) helps seat o-rings
providing an improved seal. Apply lubricant to
o-rings prior to assembling high pressure hose
(pump end) , high pressure hose (gun end) ,
garden hose to the pump , and plastic wand (gun
end). Purchase an O-Ring Maintenance Kit by
contacting
- Remove all debris, especially from the ventilation
slots.
- Check high-pressure hose.
- Check the power cable and plug.
- To turn the light off, press
SOFT ⑲
and
MEDIUM
⑳
at the same time for 5 seconds.
㉘
Overheating
- The light
㉘
turns on when the temperature inside
the machine exceeds the preset threshold. It does
NOT indicate a technical problem.
- Move the machine to a ventilated place and/or let
it cool down.
- Turn off the machine by pressing the 0/I button
⑱
and disconnect the plug from the power outlet.
