Lavor PRO THERMIC 2W 13 L 0.066.0037 - Инструкция по эксплуатации - Страница 17

17

EN

WARNING

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

R e a d   a n d   k e e p   i n   m i n d   t h a t   i n d i c a t e d   i n   t h e 

INSTRUCTION MANUAL - SAFETY WARNINGS.

SPECIFICATIONS AND TECHNICAL DATA

CAUTION

•  For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20% lower than 

the machine’s maximum performance.

•  The engine’s maximum power diminishes as the altitude and ambient temperature at which it is working increases 

(there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every 5.6°C/42°F above 16°C/61°F). If 

the high pressure water cleaner is used at a high altitude or with high ambient temperature please refer to the 

engine’s operating and maintenance manual to see if any precautions need to be taken.

•  The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient temperature 

of 16°C/61°F.

•  If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain conditions 

the thermostat valve can open and prevent the complete self-priming of the pump. In these cases, fit a rubber 

hose into the hose connection of the thermostatic valve and bring the other end of the hose to the tank from 

where the pump takes the water.

•  The specifications and technical data are approximate. The manufacturer reserves the right to make all changes 

to the machine it deems appropriate.

THERMIC 2W / PRO

9H 2115

13L  2915

13H 2915

13L 2517

13H 2517

MOTORISATION

HONDA GX270

LONCIN G390F

HONDA GX390

LONCIN  G390F

HONDA GX390

Fuel

Petrol

Power  

 (kW - HP)

6,7 - 9,0

9,6 - 13,0

Nominal rotation speed - maximum   

 (RPM)

3400 - 3600

HYDRAULIC CIRCUIT

Maximum supply water temperature  

 (°C - °F)

60 - 140

Minimum supply water temperature  

 (°C - °F)

5 - 41

Minimum supply water flow rate  

 (l/min - USgpm)

20 - 5,3

21 - 5,5

Maximum supply water pressure  

 (bar - psi)

8 - 116

Maximum priming depth  

 (m - ft)

NO

0,5 - 1,7

PERFORMANCE 

Maximum flow rate  

 (l/min - USgpm)

15 - 4,0

17 - 4,5

Nominal flow rate  

 (l/min - USgpm)

14 - 3,7

16 - 4,2

Maximum pressure  

 (bar - psi)

220 - 3191

310 - 4496

260 - 3770

Nominal pressure  

 (bar - psi)

210 - 3045

290 - 4206

250 - 3625

Maximum reaction force on the spray gun  

 (N)

50

54

59,5

Sound pressure level - Uncertainty  

 (dB(A))

92,8 – 0,7 

(1)

Sound power level  

 (dB(A))

106 

(1)

Operator hand-arm vibration - Uncertainty  

 (m/s

2

)

11 – 0,24 

(1)

PUMP OIL

ENI MULTITECH THT 

(2)

WEIGHT AND DIMENSIONS

Length x width x height (mm - in)  

 (mm - in)

850x580x1050 - 33,5x23x41

Weight  

 (kg - lb)

48 - 106

50 - 110

52 - 115

(1)

 Measurements in agreement with EN 60335-2-79.

(2)

 Also see the corresponding oils table.

EN