Мойки высокого давления Karcher K 5 200 CR Silver - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
– 6
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on Page 2
1 Water connection with integrated sieve
2 Coupling element for water connection
3 Detergent suction hose (with sieve)
4 Trigger gun
5 Lock trigger gun
6 Key to detach the high pressure hose
from the trigger gun
7 High pressure hose
8 Storage for accessories
9 Transport handle, detachable
10 Quick coupling for high pressure hose
11 Appliance switch "0/OFF“/ „I/ON“
12 Mains cable with mains plug
13 Carrying handle
14 Wheels
15 Spray lance with pressure regulation
(Vario Power)
16 Spray lance with Dirtblaster
Optional
17 Foam nozzle
18 Washing brush
Illustrations on Page 2
Illustration
During delivery the wheels are inserted
into the casing. They must be secured
with plugs or a wheel cover, depending
on the model.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
Caution
Always connect the system separator to the
water supply, never directly to the appliance!
Note:
Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
Use a fibre-reinforced water hose (not
included) with a standard coupling.
(Minimum diameter 1/2 inch (13 mm),
minimum length 7.5 m).
Illustration
Screw the coupling element to the wa-
ter connection on the appliance.
Push the water supply hose onto the
coupling unit, then connect it to the wa-
ter supply.
This high-pressure cleaner is suited to work
with the KÄRCHER suction hose with back-
flow valve (Optional accessory, order no.
4.440-238) to draw in surface water, e.g.
from water butts or ponds (see specifica-
tions for max. suction height).
Fill the KÄRCHER suction hose with
backflow valve with water, screw to wa-
ter supply and hang into the water butt.
Separate the high pressure hose from
the high pressure connection of the ap-
pliance.
Switch the appliance on (I/ON) for a max.
of 2 minutes and wait until the water exits
the high-pressure connection without
bubbles.
Turn off the appliance "0/OFF".
Description of the Appliance
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs
14
EN
