Karcher K 4 CompactCar 1.637-320 - Инструкция по эксплуатации - Страница 18

– 9

from water butts or ponds (see specifica-
tions for max. suction height). 



Fill the suction hose with water.



Screw the suction hose into the water 
connection of the appliance and insert it 
into the water source (e.g. rainwater 
drum).

Notice

Dry running of more than 2 minutes leads to 
damage of the high-pressure pump. If the 
appliance does not build up pressure within 
2 minutes, switch the appliance off and pro-
ceed in accordance with the instructions in 
Chapter "Troubleshooting".

Illustration 



Push the high pressure hose into the 
quick coupling until it locks audibly.



Attach the water supply hose to the 
coupling on the water connection.

Note:

 The supply hose is not included.



Connect the water supply hose to the 
water supply.



Completely open the water tap.



Insert the mains plug into the socket. 



Turn on the appliance “I/ON”.

Illustration 



Unlock the lever on the trigger gun.



Pull on the lever of the trigger gun; the 
device will switch on.
Switch the appliance on for a (max. of 2 
minutes) and wait until the water exits at 
the hand spray gun without bubbles.



Release the lever on the trigger gun.

Note:

 Release the lever of the trigger 

gun; the device will switch off again. 
High pressure remains in the system.

Illustration 



Lock the lever on the trigger gun.

몇

Danger

The water jet that is emitted from the high-
pressure nozzle results in a repulsion pow-
er acting on the hand spray gun. Make sure 
that you have a firm footing and are also 
holding the hand spray gun and spray lance 
firmly.

몇

Danger

High-pressure jets can be dangerous if im-
properly used. The jet may not be directed 
at persons, animals, live electrical equip-
ment or at the appliance itself.

Notice
Risk of damage! The appliance must only 
be operated laying down (horizontal).
Notice

Car tyres, paint or sensitive surfaces such 
as wood should not be cleaned with the dirt 
blaster, as there is a risk of damage.

Notice

Risk of damage to the paintwork
When working with the washing brush, it 
must be free of dirt or other particles.

Illustration 



Push the spray lance into the trigger gun 
and fasten it by turning it through 90°.



Unlock the lever on the trigger gun.



Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.



Danger

The use of wrong detergents or chemicals 
can compromise the safety of the appli-
ance.
Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were spe-
cifically developed for your appliance. The 
use of other detergents and care products 
may lead to premature wear and can inval-
idate your warranty claims. Please obtain 
information at your local dealer or request 
information directly from KÄRCHER.

Start up

Operation

Working with detergent

18

EN