Karcher K 4 200 - Инструкция по эксплуатации - Страница 8

8 

English

Please read and comply with 
these original operating instruc-

tions prior to the initial operation and store 
them for later use or subsequent owners.

„

Please observe the safety instructions 
of your high-pressure cleaner.

„

Only trigger the high-pressure jet at the 
high-pressure gun if the T-Racer is lo-
cated on the surface to be cleaned.

„

There must be no persons in the imme-
diate vicinity of the cleaning head.

„

Beware of the recoil force! Ensure a 
stable position and firmly hold the high-
pressure gun with the extension tube or 
the handle.

„

Switch off the high-pressure cleaner 
when you finish cleaning. If you are us-
ing the T-Racer then disconnect the 
same from the high-pressure gun.

„

Maximum water temperature 60°C 
(please observe the instructions of your 
high-pressure cleaner).

Danger!

Do not hold under the edge of the 
T-Racer when it is on!

When unpacking the product, make sure 
that no accessories are missing and that 
none of the package contents have been 
damaged. If you detect any transport dam-
ages please contact your dealer. 

See page 2, illustration 

1 Casing
2 Handle
3 Bayonet connection with safety cover
4 Extension tubes (two tubes)
5 Rotor arm
6 Yellow high-pressure nozzles (2 piec-

es)

7 Safety clip
8 Protective grid
9 Grey high-pressure nozzles (2 pieces)

The T-Racer can be used with all Kärcher 
high-pressure cleaners. For units con-
structed in 1991 and earlier you need an 
additional adapter (order no.: 4.762-062).

The T-Racer is ideally suited for the clean-
ing of floor and wall surfaces made of differ-
ent materials, such as plastic, concrete, 
tiles, and natural stone, as well as for clean-
ing Japanese gardens and pebbled surfac-
es. Use the T-Racer exclusively in your 
private household.

Safety instructions

Symbols

Description of the Appliance

Proper use