Мойки высокого давления Karcher K 3.550 1.180-130 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
-
4
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
These operating instructions describe
the maximum equipment. Depending
on the model, there are differences in
the scopes of delivery (see packaging).
Illustrations on Page 2
1
Coupling element for water connection
2
High pressure hose
3
Quick coupling for high pressure hose
4
Water connection with integrated sieve
5
Storage of detergent reservoir with de-
tergent connection
6
Appliance switch "0/OFF“/ „I/ON“
7
Transport handle
8
Dosage regulator for detergent
9
Storage for high-pressure hose
10 Detergent reservoir with locking lid
11 Storage hook for mains connection ca-
ble
12 Mains cable with mains plug
13 Storage for accessories
14 Wheels
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high-pressure hose
from the trigger gun
18 Spray lance with pressure regulation
(Vario Power)
19 Spray lance with Dirtblaster
20 Washing brush
21 Rotary washing brush
22 Delta-Racer D150
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Mount loose parts delivered with appliance
prior to start-up.
Î
Illustration
Push the wheels into the intake and se-
cure with the enclosed plugs, watch for
positioning of plug.
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Î
Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Î
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note
: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Î
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high-pressure hose.
몇
Warning
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
Operation
Scope of delivery
Description of the Appliance
Special accessories
Before Startup
Install wheels
Install the transport handle
Install the dosage regulator for deter-
gent
Connect the high pressure hose to the
hand spray gun
Water supply
15
EN
