Karcher HDS 801 В - Инструкция по эксплуатации - Страница 17

– 3



Danger

–

Do not use high pressure cleaners 
when there has been an oil spill; move 
the appliance to another spot and avoid 
any sort of spark formation. 

–

Do not store, spill or use fuel in the vi-
cinity of open flames or appliances such 
as ovens, boilers, water heaters, etc. 
that have an ignition flame or can gen-
erate sparks. 

–

Keep even mildly inflammable objects 
and materials away from the silencer (at 
least 2 m). 

–

Do not start the engine without the si-
lencer; check, clean and replace, if re-
quired, the silencer at regular intervals. 

–

Do not use the engine in forest, bushes 
or grassy areas without fitting a spark 
receiver at the exhaust. 

–

Except for setting jobs, do not run the 
engine when the air filter is removed or 
there is no cover over the suction sup-
port. 

–

Do not make any adjustments to the 
regulator springs, regulator bars or oth-
er parts that can bring forth an increase 
in the engine speed. 

–

Risk of burns! Do not touch hot silenc-
ers, cylinders or radiator ribs.

–

Do not put hands or feet close to mov-
ing or rotating parts. 

–

Risk of poisoning! The appliance should 
not be operated in closed rooms.

–

Please follow the national rules and 
regulations for fuel spray jets of the re-
spective country.

–

Please follow the national rules and 
regulations for accident prevention of 
the respective country. Fuel spray jets 
must be tested regularly and the results 
of these tests must be documented in 
writing.

–

The heating appliance of the machine is 
an ignition plant. All national laws and 
regulations about heating systems must 
also be followed.



Danger

Risk of injury!

–

Only use original high-pressure hoses.

–

The high-pressure hose and the injec-
tion system must be suitable for the 
maximum operating pressure given in 
the Technical Data.

–

Avoid contact with chemicals.

–

Check the high-pressure hose daily.
Do not use hoses with kinks.
Stop using the high-pressure hose if the 
external wire layer is visible.

–

Do not use the high-pressure hose any-
more if the winding is damaged.

–

Lay the high-pressure hoses in such a 
way that no vehicle can drive over it.

–

Do not use high-pressure hoses that 
have been driven over, kinked, pressed 
or bent even if there is no externally vis-
ible damage.

–

Store the high-pressure hoses in such a 
way that they are not subject to any me-
chanical load.

Safety devices serve for the protection of 
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.

The safety mechanism against lack of wa-
ter prevents the heater from over-heating 
when there is no water. The burner oper-
ates only when there is adequate water 
supply. 

Safety instructions

General notes on safety

High pressure hose

Safety Devices

Water shortage safeguard

17

EN