Мойки высокого давления Karcher HD 13 35 PE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
– 7
–
Do not use the appliance while other
people are present.
–
Risk of hearing impairment. Always use
proper ear-protection aids while work-
ing with the appliance.
–
Vehicle tyres/ tyre valves may not be
cleaned with this appliance due the high
water pressure.
–
Do not spray materials contains asbes-
tos or other health-hazardous sub-
stances.
–
Pay attention to ensure that all screws
of all connecting hoses are tightened
properly.
–
The lever of the hand spray gun must
not be locked during the operation.
–
Do not drive over the main cable or the
high pressure hose.
–
Work only with adequate lighting.
Open the water supply.
Unlock the safety lock at the hand-
spray gun by pressing it.
Press the lever on the hand spray gun.
Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
몇
Warning
The handgun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing. Hold the
handgun and spray lance firmly.
The appliance is equipped with the follow-
ing nozzles:
Power nozzle, 15° spray angle
–
High pressure flat spray (15°) for large
dirt areas
Note
To prevent damage due to too much pres-
sure, always position high pressure ray first
from a greater distance towards object to
be cleaned.
Pull the lever on the handgun.
Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
The working pressure can be read from
the manometer.
Release the lever on the trigger gun.
Use the safety catch to secure the
handgun lever.
Store the hand spray gun and spray
pipe in the accessory mount.
In case of extended interruptions (sev-
eral minutes), switch off the engine.
Note
When the lever of the hand spray gun is re-
leased, the engine continues to run at de-
creased speed. The water thus circulates
within the pump and gets heated. When the
cylinder head at the pump has reached the
maximum permissible tempertaure (80 °C),
the therm-valve on the pump opens and
lets out the hot water into the open.
After operating the water using saline
water (sea water), open the hand spray
gun and rinse the appliance for at least
2 - 3 minutes using tap water.
Release the lever on the trigger gun.
Set the appliance switch at the engine
to OFF and close the fuel supply valve.
Shut off water supply.
Activate hand spray gun until device is
pressure less.
Use the safety catch to secure the
handgun lever.
Remove the water inlet hose from the
appliance.
Store the hand spray gun and spray
pipe in the accessory mount.
Stow away the high-pressure hose and
accessory at the machine.
Turning on the Appliance
High pressure operation
Power nozzle
Set working pressure and flow rate
Interrupting operation
Finish operation
21
EN
