Мойки высокого давления Karcher HD 13 35 4 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
– 6
Pull the lever on the handgun.
Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
The working pressure can be read from
the manometer.
Release the lever on the trigger gun.
The appliance switches off after 30 sec-
onds.
Use the safety catch to secure the
handgun lever.
Store the hand spray gun and spray
pipe in the accessory mount.
After operating the water using saline
water (sea water), open the hand spray
gun and rinse the appliance for at least
2 - 3 minutes using tap water.
Release the lever on the trigger gun.
Set the appliance switch to "0".
Shut off water supply.
Activate hand spray gun until device is
pressure less.
Use the safety catch to secure the
handgun lever.
Remove the water inlet hose from the
appliance.
Pull out the mains plug.
Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
몇
Warning
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
Store the appliance in a heated room dur-
ing winter or empty it. During longer breaks
in operation, it is advisable to pump in anti-
frost agents into the appliance.
Screw off water supply hose and high
pressure hose.
Blow through machine with com-
pressed air.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.
Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Push the push handle down and push
the appliance.
Connect the lifting device in the center
of the strut to load by crane.
Danger
Risk of injury due to machine dropping.
–
Adhere to the local accident prevention
guidelines and safety notes.
–
Check the appliance for crane loading
for damage prior to each transport by
crane.
–
Check the lifting unit for damage prior to
each transport by crane.
–
Only lift up the appliance by this mech-
anism when loading by crane.
–
Do not use stop chains.
–
Protect the lifting device from inadvert-
ent load release.
–
Remove the spray pipe with hand spray
gun as well as loose articles prior to
transporting by crane.
Set working pressure and flow rate
Interrupting operation
Finish operation
Frost protection
Drain water
Flush device with anti-freeze agent
Transport
Driving
Transport by crane
Safety information about cranes
20
EN
