Мойки высокого давления Karcher HD 11 35 Cage - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
English
19
The safety valve opens when the overflow
valve is defective.
The safety valve is set by the manufacturer
and sealed. Setting only by customer serv-
ice.
The thermo-valve opens when the permissi-
ble water temperature is exceeded and lets
out the hot water into the open.
The engine protection switch interrupts the
electric circuit if the engine is overloaded.
The parking brake prevents the appliance
from rolling off.
몇
Danger
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. Otherwise, the appliance must not
be used.
Î
Lock parking brake.
Î
Check oil level of the high pressure
pump using the oil dipstick.
Do not operate the appliance if the oil level
has fallen below "MIN".
Î
Add oil if required (see technical specifi-
cations).
Î
Connect high pressure hose and spray
pipe to the hand spray gun.
Î
Mount the power nozzle on the spray
pipe. Tighten covering nut firmly.
Î
Connect the high pressure host to the
high pressure connection point of the
machine.
Figures A-C
– For connection values refer to technical
specifications
– The electrical connections must be done
by an electrician according to IEC
60364-1.
몇
Warning
The highest allowed net impedance at the
electrical connection point (refer to technical
data) is not to be exceeded.
Danger
–
Check whether the voltage indicated on
the type plate corresponds to the voltage
of the socket.
–
Unsuitable extension cables can be haz-
ardous. Only use extension cables out-
doors which have been approved for this
purpose and labelled with a sufficient ca-
ble cross section:
1 -10 m: 4 mm
2
10 -30 m: 6 mm
2
– For connection values refer to technical
specifications
– Observe regulations of water supplier.
Î
Use a fibre-reinforced hose (not included
in standard delivery).
Diameter should be minimum 1".
Î
Connect the hose to the water connec-
tion of the appliance.
Î
Connect the hose to the water tap.
Î
Open the water supply.
Safety valve
Thermo-valve at the pump
Engine protection switch
Parking brake
Start up
Check oil level
Install hand spray gun
Installing spare high pressure hose
Power supply
Water connection
