IPC Portotecnica OPTIMA CMP DS 149 M 47354 IDAC - Инструкция по эксплуатации - Страница 22

English

- 22 -

ELECTRICAL CONNECTION

Connection of the cleaner to the mains must be carried out 

be skilled technicians able to ensure that all regulations in 

force are complied with 

use in respect of current standards 

and legislation.

Ensure that the mains voltage available is the same as the vol-

tage at which the cleaner is supposed to work; this is indicated 

on the identification plate.

Danger

- The electric cable must be protected from accidental  crushing.

- Do not use the machine if the supply cable is damaged.

- The use of any electric appliance requires the respect of 

some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

•  Do  not  use  the  appliance  bare-footed  or  with  unsuitable           

clothing.

•  Do  not  pull  the  supply  cable  or  the  appliance  itself  in  order                       

to   disconnect the plug from the electric supply.

(For water cleaners rated at less than 3 kW fitted with plug).

As for the protection against electric shock, the H.P.cleaner 

belongs to 

CLASS I

.

Failure to observe the above warning frees the manufac

-

turer from all responsibility and constitutes negligent use 

of the product.

FIG. 6

FIG. 5

!

!

!

FILLING THE  WATER SOF-

TENER  TANK.

Fill the tank with water sof-

tener solution. 

Use only products recom-

mended by the manufac-

turer and/or dealer. Follow 

the instructions given on the 

packaging meticulously. (Do 

not disperse water softener in 

the environment).

TRANSPORTING

To move the machine, di-

sconnect it from the mains 

electricity and water supplies, 

release the parking brake on 

the side of the machine and 

push it by the handle.

FIG. 4

Anti-Scale

Anti-Scale

A

B

C

COMMAND AND CONTROL DEVICES

Warning

Before connecting the machine to the water supply and to the 

power mains, it is essential to know the function of the cleaner's 

command and control devices.

SAFETY DEVICES

The safety devices protect the user and the appliance. They 

must not be tampered with or used for other than their desi-

gnated purpose.

Safety  valve: 

protects the high pressure hydraulic circuit in 

the event of a by-pass valve malfunction or if the hydraulic 

circuit is blocked.

The safety valve is calibrated by the Manufacturer and sealed. 

Operations involving the safety valve must be performed by a 

technical service centre only.

Safety device on lance handgrip:

 Prevents the trigger on the 

handgrip from being operated accidentally.

Thermal cutout:

 stops the high pressure washer if the electric 

motor overheats.

!

WATER CIRCUIT CONNECTION

Connect the feed hose to the mains (fig. 5A) and to the hosetail 

on the cleaner (fig. 5B). 

Check that the pressure and quantity of the water supplied by 

the mains are sufficient for the cleaner to work properly: 2 to 8 

BAR (29 to 116 PSI).

Maximum temperature of 

feeding water 50°C (122°F).

Connect the high pressure 

hose  to  the  cleaner  (fig.  5C) 

and to the lance (fig. 6). 

Danger

The  cleaner  must  operate 

with  clean  water.  Dirty  or 

sandy water, corrosive che

-

micals and solvents can 

cause severe damage to 

the cleaner.

Danger

Never suck up liquids contai-

ning solvents or acids in the 

pure state, for example petrol, 

paint solvents or diesel. The 

spray mist from the lance is 

highly inflammable, explosive 

and poisonous.

Failure to respect the above 

absolves  the  manufacturer 

of  all  liability  and  repre

-

sents  negligent  use  of  the 

product.