IPC Portotecnica G 130-C I 1207 A 94293 IDAF - Инструкция по эксплуатации - Страница 13

13

The electrical system to which the ap-

pliance is connected must be realized in 

compliance with the laws of  the country 

of installation. 

Whenever  extension  cables  are 

used, the relative plugs and so-

ckets must at least comply with 

protection class IPX5 (i.e. protection 

against water jets). Use of inappropriate 

or  non-compliant  extension  cables  may 

incur in danger and hazards to the devi-

ce.  The H.P. cleaner must be connected 

to the electric supply by means of an 

omnipolar switch with opening contacts 

of at least 3 mm. This switch must have 

electric features which are consistent with 

the appliance. 

The  presence  of  a  differential  magneto

-

thermal switch is necessary with a sen-

sitivity of equivalent to 30 mA, above the 

power socket or the system.

The appliance is disconnected from the 

electric supply only by pulling out the plug 

or switching off the omnipolar switch. 

Water cleaners with the “Total 

Stop” device should be considered 

as off when the omnipolar switch is 

in the “O” position or the plug is unplugged 

from the socket.

Please beware that when the Total Stop 

system is active the device may look as 

though it has been powered off, however, 

the machine is not totally powered off until 

the mains switch has been  turned to off 

and/or the mains power plug has been 

detached.

Only put the appliance into operation 

providing that all components are free of 

defects.

Firstly check the mains attachment wire, 

the high pressure pipe, the spraying devi-

ce and the body. Do not tread on the high 

pressure pipe; do not pull, bend or twist 

it.  Do not shift the appliance by pulling it 

by the high pressure pipe. Never operate 

with a defective high pressure pipe, but 

always replace with original spare.  The 

high pressure pipe must be homologated 

for the permitted working overpressure of 

the appliance.

The  functional  overpressure  and  maxi

-

mum temperature admitted, as well as 

the date of construction are printed on the 

high pressure pipe covering.

WARNING: This machine was designed 

to be used with the detergent recommen-

ded by the manufacturer. The use of other 

detergents or chemical products may 

compromise the safety of this machine.

Use only slightly alkaline detergents (Ph 

9.1, 1% solution), that are over 90% bio-

degradable.

As concerns water connection, refer to 

the regulations of the individual countries. 

The constructor will not accept liability for 

any damage to people, animals or things 

as the result of improper, incorrect or 

unreasonable use, or use which does not 

comply with the above indications.  

This device is not intended for use by 

physically, sensorially or psychological-

ly impaired and/or disabled individuals 

(including all children). It is also not in-

tended for use by individuals without any 

knowledge, experience or operation skills 

on the device, unless said individuals 

haven’t first been monitored by a person 

put in charge of their safety and/or have 

been regularly instructed on how to use 

the device correctly. Children must be 

carefully monitored to ensure they do not 

play with the device.

Water that flows through a system 

backflow  preventer  cannot  be  classified 

as potable water. Use a suitable potable 

water  backflow  preventer  device,  com

-

pliant to the EN 12729 type BA standard 

provisions.

Use  only  flexible  hosing,  accessories 

and fittings recommended by the manu

-

facturer. 

Do not use the appliance in the event of 

any damage to the power cable or other 

parts such as piping and fitting.

Use only 

original spares.

Undertake only the maintenance opera-

tions described in the user instructions.

Contact the Technical Assistance service 

for all other interventions.

The machine must be handled and/or 

moved ONLY with the appropriate handle 

(do not attempt to move the machine by 

tugging on the tube and/or on the power 

supply cable);

Before operating the machine, ensure that 

it is standing very firmly on a flat, smooth 

and horizontal surface.

In case of damage or malfunction, switch 

off  the  appliance  (disconnecting  it  from 

the water main and from the electricity 

main via the omnipolar switch or by 

unplugging the plug in the case of water 

cleaners rated at less than 3 kW) Do not 

tamper.

If the water cleaner is left, even tempo-