Efco IP 1550 38251 - Инструкция по эксплуатации - Страница 18

17

1  G

eneral

 I

nformatIon

Congratulations  for  choosing  one  of  our  products.  We  would  like  to  remind  you  that  we  took  the  safety  of  the 
operator, the efficiency of its use and the protection of the environment into great consideration when designing and 
manufacturing this product.
In order to preserve its features over time, please read and follow these instructions carefully. 
Particular attention must be awarded to the parts with the following symbol:

   WarnInG

as they contain important instructions regarding safety when using the water cleaner.

the manufacturer is not liable for damage caused by:

•  failure to comply with these instructions;
•  use of the water cleaner not included in the 

“IntenDeD uSe” 

section;

•  failure to comply with current safety regulations and regulations for the prevention of accidents in the workplace;
•  incorrect installation;
•  failure to carry out the prescribed maintenance;
•  modifications or actions without the authorisation by the Manufacturer;
•  use of non-original or unsuitable spare parts for this model of water cleaner;
•  repairs which were not carried out by a 

Skilled technician

.

1.1 a

DDreSS

of

the

 m

anufaCturer

The address of the manufacturer is given in the declaration of conformity at the end of this part of the instruction 
manual.

1.2 u

Se

 a

nD

 C

onServatIon

of

theSe

 o

PeratInG

anD

 m

aIntenanCe

 m

anual

The operating and maintenance instructions are an integral part of the water cleaner and they must be kept in a safe 
place for future reference so that they may be readily consulted in case of need.
The operating and maintenance instructions contain important information for the safety of the operator and of any 
people near him and for the protection of the environment.
In  case  of  deterioration  or  loss,  a  new  copy  should  be  requested  from  the  dealer  or  from  an  authorised  service 
centre.
If the water cleaner is passed on to a third party, please make sure these operating and maintenance instructions are 
also given to the new owner.
We take great care when drawing up our instructions. If you note any mistakes, please do inform the Manufacturer 
or an authorised service centre.
The Manufacturer reserves the right to modify, update and correct these instructions without notice.
It is illegal to copy these instructions, even partially, without prior authorisation by the Manufacturer.

1.3 S

ymbolS

anD

 t

ermS

1.3.1  Symbols

The symbol:

WarnInG

next  to  certain  parts  of  the  text,  is  to  indicate  that  there  is  the  firm  possibility  of  injury  to  persons  if  the  relative 
instructions and indications are not followed.
The symbol:

  CautIon

next to certain parts of the text is to indicate that there is the possibility of damaging the water cleaner if the relative 
instructions are not followed.

1.3.2  Terms

• 

Skilled  technician: 

a  person,  generally  from  the  service  centre,  who  has  received  appropriate  training  and  is 

authorised to carry out special maintenance and repairs on the water cleaner. Any work on is electrical parts must 
be carried out by a 

Skilled technician

 who is also a 

qualified eletrician

, i.e. a person with professional training 

who is authorised to check, install and repair electrical equipment correctly and according to current regulations in 
the country where the water cleaner is installed.

• 

total Stop: 

this stops operation of the water cleaner every time the control lever on the cleaner gun is released. 

• 

easy Start: 

this aids starting up the water cleaner by lowering the pressure for the first moments of its operation.

GB