Bosch EasyAquatak 110 - Инструкция по эксплуатации - Страница 12

Мойки высокого давления Bosch EasyAquatak 110 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 282
Загружаем инструкцию
background image

12

 | English 

F 016 L81 747 | (7.8.17)

Bosch Power Tools

We recommend that this equipment 

is only connected into a socket which 
is protected by a circuit-breaker that 
would be actuated by a 30 mA residu-
al current.

Remove the plug from socket when-

ever the machine is left unattended 
for any period.

The electric supply installation 

should comply with IEC 60364-1.

If the supply cord is damaged, it must 

be replaced by the manufacturer, its 
service agent or similarly qualified 
persons in order to avoid a hazard.

If the plug is damaged, pay attention 

to the following:

Plugs and sockets situated near the 

work site or outdoors should be to 
class IP 55 of BS 5490 to provide ad-
equate protection against ingress of 
water, etc. and cable entries require 
effective sealing. Rubber shrouds 
should be provided over cable 
glands. Drip-proof (class IP X2 of 
BS 5490) plugs and sockets to 
BS 4343 are suitable for use indoors 
where the plug is away from the water 
spray area where the appliance is in 
use.

Never touch the mains plug with wet 

hands.

Do not pull plug while operating the 

device.

Do not run over, crush or pull the 

power supply cord or extension cord, 
otherwise it may be damaged. Pro-
tect the cable from heat, oil and sharp 
edges.

Do not use the unit, if the power sup-

ply cord or important parts, e. g. 

high-pressure hose, power gun or 
safety devices are damaged.

Warning: Inadequate extension cords 

can be dangerous.

If an extension cord is used, the plug 

and socket must be of watertight con-
struction. The extension cord must 
have a cross section in accordance 
with the operating instructions and 
be protected against splashed water. 
The connection must not be in water.

When replacing plugs on the power 

supply cable or extension lead the 
spray water guard and mechanical 
stability must remain intact.

Water connection

Comply with the regulations of your 

water supply company.

All connecting hoses must have prop-

erly sealed joints.

Make sure that the supply hose is at 

least 12.7 mm (1/2") in diameter and 
is reinforced.

The appliance should never be used 

on the drinking water supply without 
a back flow valve. Water which has 
passed the back flow valve is regard-
ed as undrinkable.

The high-pressure hose must not be 

damaged (danger of bursting). A 
damaged high-pressure hose must be 
replaced immediately. Only use hos-
es and connections recommended by 
the manufacturer.

High-pressure hoses, fittings and 

couplings are important for the safety 
of the appliance. Use only hoses, fit-
tings and couplings recommended by 
the manufacturer.

OBJ_BUCH-2949-002.book  Page 12  Monday, August 7, 2017  2:55 PM

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Bosch EasyAquatak 110?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"