Bosch EasyAquatak 100 0.600.8A7.E00 - Инструкция по эксплуатации - Страница 14

14

 | English 

F 016 L81 745 | (26.10.17)

Bosch Power Tools

chine. Local regulations may restrict 
the age of the operator. 



Children should be supervised to en-

sure that they do not play with the
machine.



The unit must never be left unsuper-

vised while the unit is switched on.



The water jet from the high-pressure

nozzle produces a recoil on the gun.
You should therefore hold the gun
and spray lance firmly.



The product should not be held by the 

operator whilst in operation and
should be kept in an upright position
as illustrated within this manual when 
placed on the ground.

Transport



Switch off the motor and secure the

unit before transporting.

Maintenance



Switch off the unit prior to all cleaning 

and maintenance work and before re-
placing components. Pull out the
mains plug if the unit is mains-operat-
ed.



Repairs may only be carried out by

authorised Bosch Service Centres.

Accessories and spare parts



Accessories and spare parts which

have been approved by Bosch must 
be used. Original accessories and 
spare parts guarantee that the unit 
can be operated safety and without 
any breakdowns.

Symbols

The following symbols are important for reading and under-
standing the operating instructions. Please take note of the 
symbols and their meaning. The correct interpretation of the 
symbols will help you to use the machine in a better and safer 
manner.

Intended Use

The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate 
accessories such as cleaning agents approved by Bosch are 
used.

Intended use is related to operation within 0 ° C and 40 ° C am-
bient temperature.

This product should not be used for professional use.

The product should not be held by the operator whilst in oper-
ation and should be kept in an upright position as illustrated 
within this manual when placed on the ground.

Technical Data

Symbol

Meaning

Movement direction

Weight

On

Off

Accessories

Pressure washer

Easy

Aquatak 100

Article number

3 600 

HA7

 E..

Rated power

kW

1.2

Supply temperature max.

° C

40

Supply rate min.

l/min

5.5

Allowable pressure

MPa

10

Rated pressure

MPa

6.7

Rated Flow

l/min

4.8

Maximum inlet pressure

MPa

1

Autostop function



Weight according to EPTA-
Procedure 01:2014

kg

3.7

Protection class

/

II

Serial number

See serial number   (rating plate)

on pressure washer.

The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Starting cycles generate brief voltage drops. Interference with other 
equipment/machines may occur in case of unfavourable mains system 
conditions. Malfunctions are not to be expected for system impedances 
below 0.153 ohm.

OBJ_BUCH-3244-001.book  Page 14  Thursday, October 26, 2017  10:08 AM