Мойки высокого давления Bosch AdvancedAquatak 140 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

12
| English
English
Safety Notes
Read all safety warnings
and all instructions.
Failure
to follow the safety warnings
and instructions may result in electric
shock, fire and/or serious injury.
The warning and information signs
attached to the unit provide import-
ant information for safe operation.
Apart from the information in the
operating instructions comply with
the general safety regulations and
regulations for the prevention of ac-
cidents.
Explanation of symbols
General hazard safety alert.
Never direct the water jet at
people, animals, the machine
or electric components.
Warning: High pressure jets can be
dangerous if subject to misuse.
According to the applicable
regulations, the appliance
must never be used on the
drinking water network without a
system separator. Use a separator
as per IEC 61770 Type BA.
Water flowing though a system sep-
arator is considered not drinkable.
≥100 A
The
AdvancedAquatak 140
is intended for use only in
premises having a service cur-
rent capacity ≥100 A per phase, sup-
plied from a distribution network hav-
ing a nominal voltage of 230 V. If in
doubt please contact your Supply Au-
thority.
Safety Notes for pressure washer
Connecting to the mains
u
The voltage of the power source
must correspond with the data on
the type plate of the product.
u
We recommend that this product is
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA resid-
ual current.
u
The circuit breaker supplying mains
power to the high-pressure washer
should have no less than a C16 rat-
ing. If in doubt consult a qualified
electrician for further advice. Do not
attempt to modify your electrical
system yourself.
u
Remove the plug from socket
whenever the machine is left unat-
tended for any period.
u
The electric supply installation
should comply with IEC 60364-1.
u
If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to avoid a
hazard.
F 016 L81 693 | (30.04.2019)
Bosch Power Tools
Содержание
- 153 Указания по технике безопасности
- 154 Электроподключение
- 156 При пользовании очи-
- 158 Символы; Применение по назначению; Данные по шуму и вибрации
- 159 Монтаж и эксплуатация; Для Вашей безопасности; Работа с инструментом; Включение
- 160 Указания по работе; Общее; Резервуары для воды со спускным краном; Поиск неисправностей
- 162 Техобслуживание и сервис; Техническое обслуживание; После эксплуатации и хранения; Охрана окружающей среды
- 163 Утилизация; Українська; Вказівки з техніки безпеки; Невиконання вказівок з; Пояснення щодо символів
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)













