BORT BHR-1900-Pro 98297218 - Инструкция по эксплуатации - Страница 2

2

SAFETY AND OPERATING INSTRUCTIONS

HIGH PRESSURE CLEANER

For your own safety and for the safety of others, please 
read these instructions carefully before using this ap-
pliance.

WARNING! Always read the instruction for
electrical products carefully before use. It will 
help you understand your product more eas-

ily and avoid unnecessary risks. Keep this instruc-
tion manual in a safe place for future use.

1. MACHINE DATA

INTRODUCTION

The high pressure cleaner is quick and ef

fi

 cient  for 

cleaning vehicles, machines, boats, buildings, etc., 
by the removal of stubborn dirt using clean water and 
chemical detergents.
When using chemical detergents, only use biodegrada-
ble types. Only clean vehicle engines in areas in which 
suitable oil traps are installed.

TECHNICAL SPECIFICATIONS

Voltage 

AC 230 V

Input power

1900 W

Working pressure

130 bar

Max. pressure water supply

150 bar

Max. water temperature

50º C

Working 

fl

 ow rate 

7.5 L/min

Hose length

5 m

Weight

7.3 kg

THE COMPLETE SET INCLUDES:

Soap bottle
Pressure hose
Adjustable spray nozzle
Power cord

2. SAFETY INSTRUCTIONS

EXPLANATION OF SYMBOLS

In this manual and/or on the machine the following
symbols are used:

In accordance with essential applicable safe-
ty standards of European directives

Risk of damaging material and/or physical 
injuries

Remove plug from the mains immediately if 
cable is damaged or cut

Read instruction manual

Denotes risk of electric shock

SAFETY INSTRUCTIONS

When using electric machines always observe the safety 
regulations applicable in your country to reduce the risk 
of 

fi

 re, electric shock and personal injury. Read the fol-

lowing safety instructions and also the enclosed safety 
instructions.
Keep these instructions in a safe place!

ELECTRICAL SAFETY

●

  Always check if your mains voltage corresponds 

with the value on the type plate.

●

  When replacing old cables or plugs: throw away old 

cables or plugs immediately as soon as new ones 
have replaced these. It is dangerous to put the plug 
of a loose cable into the socket outlet.

●

  When using extension cables:

Only use an approved extension cable that is suitable 
for the machine’s power. The cores must have a diam-
eter of at least 1.5 mm

2

. When the extension cable is 

on a reel, unroll the cable in its entirety.

●

  All electrical connections e.g. extension cable, must 

be of an approved waterproof type for outdoor use 
and marked accordingly. Extension cables must be 
threecore, one of which is EARTH.

SWITCH OFF THE MACHINE IMMEDIATELY
IN CASE OF

1.  Malfunction in the mains plug, power cable or dam-

aging of cable.

2. Broken switch.
3.  Smoke or stench of scorched insulation.

SPECIFIC SAFETY RULES

The USE and MAINTENANCE manual constitutes an 
essential part of the cleaner equipment and should be 
kept in a safe place for future reference. If you sell the 
cleaner, the manual should be handed on to the new 
owner.

●

  Before starting the cleaner, make sure that it is re-

ceiving water correctly. Operating the cleaner with-
out water could damage the seals.

●

  Do not disconnect the plug by pulling on the electri-

cal cable.

●

  If you are too far from the object you wish to clean, 

do not move the cleaner nearer by pulling on the 
high pressure hose; use the handle provided.

●

  In versions not equipped with TSS device, do not 

operate the cleaner for more than 1-2 minutes with 
the gun closed as this could damage the seals.

●

  Protect the cleaner from freezing during the winter.

●

  Do not obstruct the ventilation grilles during opera-

tion.

English