ADA Ground Drill 8 - Инструкция по эксплуатации - Страница 8

MEASUREMENT FOUNDATION

Ground

Drill-8

Ground

Drill-8

8

Clean the spark plug if it´s dirty. Check electrode gap. If necessary, make readjustment. Electrode gap should be 0.6mm. 

Gear

Every 50 h of operation check lubricant level in the gear or gear system by way of disposal of priming plug for lubricant on the side of 

gear. If you don´t see lubricant on the gear wheels, fill the gear 3/4 with universal lithium grease. Don´t fill the gear fully.

Fuel filter

Remove fuel from the fuel tank into an approved fuel container and take out a lign of fuel filter from the fuel

tank. Take out filter element and wash it with warm warter with detergent. Dry the element on the air.

Replace the fuel filter If it´s hard and very dirty.

Muffler cleaning

Demount muffler and spark gap switch (if you have it) and remove exhaust carbon from exhaust port or entrance of the muffler every 

100h of operation.

Long term storage

Remove all fuel from the fuel tank. Start the engine and let it run until it stops. Repair all damages that appeared during operation.

Clean the instrument with clean cloth. Add some drops of 2 cycle oil into the cylinder through the hole in the spark plug and run the 

engine. 

Store ground drill in dry place.