Philco PCF 3162 i - Инструкция по эксплуатации - Страница 11

EN - 9

 10/2016

Copyright © 2016, Fast ČR, a. s.

PART 4: DAILY USE

First use

Cleaning the interior

Before using the appliance for the fi rst time, wash the interior and all internal accessories with lukewarm water 
and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.

IMPORTANT! 
Do not use detergents or abrasive powders, as these will damage the fi nish.

Temperature setting

Temperature indicator light

Fast freezing indicator light

Set key

OFF key

Running 
indicator 
light

1.0 Electrical connection



When the appliance is plugged in, all LED indicator lights will fl ash once. Then the appliance will resume 
the mode previously set before the electrical outage.

2.0 Temperature Setting



Setting: Press “SET” button, enter the temperature setting mode. The temperature indicator bar of 
temperature goes up a scale by each press. This setting runs in cycles. Temperature can run from Scale MIN 
to Scale MAX. Scale MAX is the coldest. The temperature is automatically set in 5 seconds after last press.



  Super Freezing

-

Press “SET” button consecutively to enter “SUPER” freezing mode from Scale MAX, the indicator bar on the 
left hereby will turn dark whereas the indicator light of “SUPER” turns on. This mode is automatically set in 
5 seconds after last press.

-

The compressor keeps working in “SUPER” freezing mode.

-

If the “SUPER” mode keeps running for 52 hours and not stopped manually, the system will automatically 
cut out this mode, with the temperature back at Scale 5.