Kraft KF-HS 125 W - Инструкция по эксплуатации - Страница 29

29

UPRIGHT FREEZER

USER GUIDE

the surfaces of the freezer.

3.  Do  not  use  a  high-pressure  cleaner  or  steam  jet  cleaners,  as  penetrating  moisture 

can cause electric shock.

4.  The condenser grill on the back of the freezer can be cleaned with a vacuum cleaner 

and a soft brush head.

5.  After cleaning, check that the power cord is not damaged. Then insert the plug firmly 

into the wall outlet.

  ATTENTION!  Do  not  use  abrasive  substances,  gasoline,  benzene,  solvents, 

hydrochloride, hot water, metal, or coarse brushes, etc. for cleaning, as they can 

damage the surface of the freezer.

REVERSE DOOR

The freezer is designed so that the door can open to the right or left, depending on 

the layout of your kitchen. If it is necessary to rehang the doors, call the service master. 
The warranty does not apply to the rehanging of the door.

TROUBLESHOOTING

During operation, if any malfunctions are detected that the consumer cannot eliminate 

on  their  own,  it  is  necessary  to  contact  the  service  workshop  for  the  repair  of  freezer 
equipment.

But before contacting the repair service, read this section. This list includes the most 

common cases that are not the result of poor assembly quality or poor-quality materials 
used in this device.

 ATTENTION!  Before  troubleshooting,  you  must  disconnect  the  product  from 

the  mains.  Troubleshooting  that  is  not  described  in  this  manual  should  only  be 

carried out by a qualified electrician or a competent technician.

Malfunction

Possible cause

Solution

The freezer does not 
work.

The plug is not plugged in or not fully 
plugged in.

Plug the plug into the wall outlet.

The fuse is blown or faulty.

Check the fuse. Replace it if necessary.

The plug is faulty.

The fault is fixed by an electrician.

The freezer is 
exceptionally cold.

The temperature is set to very low.

Adjust the temperature to higher values.

The buildup of ice on 
the sealing strip.

The sealing tape is not airtight.

Heat the sealing tape with warm air, 
using a hair dryer to dry your hair. At the 
same time, straighten the tape with your 
hands, giving it the necessary shape to 
ensure tightness.