Philips 192E1SB_00 - Инструкция по эксплуатации - Страница 21

Regulatory Information

RETURN TO TOP OF THE PAGE

End-of-Life Disposal 

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to 
increase the amount of reusable materials and to minimize the amount to be disposed of. 

Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. 

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. 
For additional information on recycling contact 

www.eia.org

 (Consumer Education Initiative)

RETURN TO TOP OF THE PAGE

Information for UK only

WARNING - THIS APPLIANCE MUST BE 
GROUNDING.

Important:

This apparatus is supplied with an approved moulded 13A plug. To 
change a fuse in this type of plug proceed as follows: 

1. Remove fuse cover and fuse. 

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved 
type. 

3. Refit the fuse cover. 

If the fitted plug is not suitable for your socket outlets, it should be cut off 
and an appropriate 3-pin plug fitted in its place. 

If the mains plug contains a fuse, this should have a value of 5A. If a 
plug without a fuse is used, the fuse at the distribution board should not 
be greater than 5A. 

Note: The severed plug must be destroyed to avoid a possible shock 
hazard should it be inserted into a 13A socket elsewhere. 

How to connect a plug

The wires in the mains lead are coloured in accordance with the 
following code: 

BLUE - "NEUTRAL" ("N") 

file:///E|/PHILIPS/160E1 CD MANUAL-20081225/lcd/manual/RUSSIAN/160E1/safety/REGS/REGULAT.HTM 第 7 頁 / 共 9  [2008/12/26 下午 01:33:21]