VITEK VT-1419(BK) - Инструкция по эксплуатации - Страница 4

Миксеры VITEK VT-1419(BK) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

4

 ENGLISH

or if they are not instructed by this person on 
the usage of the unit. 

 •

For children safety reasons do not leave poly-
ethylene  bags  used  as  a  packaging  unat-
tended.

 

Attention! Do not allow children to play with 
polyethylene bags or packaging film. Danger 
of suffocation!

 •

Periodically  check  the  power  cord  and  the 
plug isolation for damages. 

 •

Do not use the unit if the power cord or plug is 
damaged, if the unit works improperly or after 
it was dropped. 

 •

Do not attempt to repair the unit. Do not dis-
assemble  the  unit  by  yourself,  if  any  mal-
function is detected or after it was dropped, 
unplug  the  unit  and  apply  to  any  authorized 
service  center  at  the  contact  addresses 
given  in  the  warranty  certificate  and  on  the 
website www.vitek.ru. 

 •

To avoid damages, transport the unit in origi-
nal package only.

 •

Keep the unit out of reach of children and dis-
abled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE 
ONLY,  ITS  COMMERCIAL  USAGE  AND  USAGE 
IN  PRODUCTION  AREAS  AND  WORK  SPACES 
IS PROHIBITED.

BEFORE THE FIRST USE

After  unit  transportation  or  storage  under 
cold  (winter)  conditions,  it  is  necessary  to 
keep it for at least 3 hours at room tempera-
ture before switching on.

– 

Unpack the unit and remove any stickers that 
can prevent unit operation.

– 

Check  the  unit  for  damages;  do  not  use  it  in 
case of damages.

– 

Make  sure  that  the  operating  voltage  of 
the  unit  corresponds  to  the  voltage  of  your 
mains.

– 

Wash  the  hooks  (6)  the  beaters  (7)  and  the 
bowl (12) with warm water and neutral deter-
gent, rinse them and dry.

– 

Clean the mixer body (4) and base (10) with a 
soft, slightly damp cloth, and then wipe it dry.

HOOKS ANS BEATERS
Dough hooks (6)

Use the hooks (6) for kneading yeasted dough, 
mixing minced meat etc.

Mix  dry  ingredients  for  the  dough  at  the  speed 
«1-2»,  when  kneading  dough,  increase  or 
decrease the hooks’ (6) rotation speed with the 
operation mode switch (2). 

Beaters (7)

Use  the  beaters  (7)  for  beating  cream  and  egg 
white,  making  biscuit  dough,  puddings,  cock-
tails, cream, mayonnaise, puree and sauces and 
for  mixing  liquid  products.  The  recommended 
speed operation modes are 3, 4, 5, «TURBO».

Notes:

– 

Check if the attachments (6) and beaters (7) 
are  attached  properly.  The  attachment  and 
the beater are equipped with a gear intended 
for  rotating  the  bowl  (12).  Insert  the  attach-
ment  with  the  gear  into  the  left  socket  (5) 
(Fig. 1).

– 

Do  not  use  the  beater  (7)  together  with  the 
hook (6).

– 

Do not block the ventilation openings on the 
mixer  body  during  the  operation;  this  may 
lead to the electric motor overheating.

– 

Maximal  continuous  operation  time  is 
no  more  than  5  minutes.  Make  at  least  a 
10  minute  break  before  switching  the  unit 
on again.

USING THE MIXER

– 

Before installing the hooks (6) or beaters (7) 
make  sure  that  the  switch  (2)  is  set  to  the 
position «0» and the plug is not inserted into 
the mains socket.

– 

Press  and  hold  down  the  button  (11),  lift  the 
support (8) and release the button (11).

– 

Set the bowl (12) on the base (10).

– 

Install the attachments (6) or the beaters (7) 
into  the  sockets  (5).  Insert  the  attachment 
or  the  beater  with  the  drive  gear  into  the  left 
socket  (Fig.  1).  Make  sure  that  the  attach-
ments are fixed properly.

– 

Press  and  hold  down  the  button  (11),  lower 
the support (8) and release the button (11).

– 

Press and hold down the button (9), place the 
mixer  (4)  on  the  support  (8)  and  release  the 
button (9). Make sure that the mixer (4) body 
is fixed properly on the support (8). 

– 

Put  the  necessary  ingredients  into  the 
bowl (12).

– 

When adding products to the bowl (12) make 
sure  that  the  attachments  (6)  or  beaters  (7) 
contact with the products, in this way the mix-
ing is thorough.

IM VT-1419.indd   4

30.11.2017   17:50:57

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1419(BK)?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"