Moulinex HM 41213E - Инструкция по эксплуатации - Страница 12

11

marker (G) should be positioned to the left, in
the biggest hole 

(Fig.1)

. 

• Connect the appliance:

- 

Your appliance has five speed levels and a
turbo button. Always begin mixing or
kneading at setting 1 initially, then move to
setting 2, 3, 4 or 5.

- 

To knead thick consistent doughs we
recommend using setting 

5

only. 

- You can also increase the speed by pressing the

turbo button 

(A3)

: this function can be used at

all speeds. We recommend that it is only used
briefly (a maximum of 30 seconds for thick
consistent doughs).

• After finishing, set the speed control 

(A2)

to “

0

”.

• Disconnect.
• Then press the ejection button

(A1)

to remove

the beaters or mixers.

• Using with the base (H): (According to model)

• Check that the speed control 

(A2)

is set to “

0

”.

• Insert the rod of each beater 

(C)

or mixer 

(E)

into

the corresponding holes and lock into place. 

The

beaters and kneaders have a specific shape,
the mixer or beater with the left beater marker
(G) should be positioned to the left, in the
biggest hole 

(Fig.1)

. 

• Place the base 

(H)

on the worktop:

- To raise the arm, unlock by pressing on the

button 

(J)

(Fig.4)

.

- Position the bowl 

(I)

(Fig.4)

.

- Press on button 

(J)

to unlock the arm and lower

it 

(Fig.5.)

- Place the mixer, fitted with kneaders or beaters,

on the hinged arm until your hear it click into
place 

(Fig.6)

. 

• Connect the appliance:

- Your appliance has five speed levels and a turbo

button. Always begin mixing or kneading at
setting 

1

initially, then move to setting 

2, 3, 4

or 

5

.

- 

To knead thick consistent doughs we
recommend using setting 

5

only. 

Note:  
INSERT THE MIXER
BY POSITIONING
THE BEATERS OR
KNEADERS IN THE
NOTCHES (Fig.6)

SM_MIXER_PREPLINE_EO_2550865-02_2550865-02  09/12/10  16:22  Page11