BRAYER BR1302 - Инструкция по эксплуатации - Страница 6

6

EN

Note:

 do not install and use the dough hook (1) and the 

beater (2) at the same time.
•  Insert the power plug into the mains socket. 

•  Immerse the attachments into the bowl with ingredients, 

switch the mixer on with the operation mode switch (5) 

and select the desired attachment rotation speed «1, 2, 

3, 4, 5».

«0» – the mixer is off.

«1» - optimal speed for mixing dry and granular products, 

such as flour.
«2» – optimal speed for mixing liquids and salad dressings.

«3» – optimal speed for making cakes or cookie dough.
«4» – optimal speed for beating cream, making desserts 

etc.
«5» – optimal speed for beating eggs, crème, making sugar 

frosting, cocktails, making potato mash etc.
If you press and hold down the button (4), the mixer will 

operate at maximum rotation speed.
•  Do not block the ventilation openings on the mixer body 

during the unit operation; this may lead to the electric 

motor overheating.

•  After the unit operation, set the operation mode switch 

(5) to the position «0», and unplug the unit. 

•  Holding the hooks (1) or the beaters (2), press the 

release button (6) and remove the attachments.

Note:

 you can remove the attachments only when the 

operation mode switch (5) is set to the position «0».

•  Wash the dough hooks (1) and the beaters (2) with 

warm water and neutral detergent, rinse them and dry.

•  Clean the mixer body (7) with a soft, slightly damp 

cloth, and then wipe it dry.

USING THE MIXER
ATTENTION! Continuous operation time of the unit 

should not exceed 5 minutes. Make at least a 20 

minute break between two operation cycles.
Dough hooks (1)

•  Use the hooks (1) for kneading yeasted dough, mixing 

minced meat etc.

Note:

 insert the dough hooks (1) into the corresponding 

installation openings (3).

Beaters (2)

•  Use the beaters (2) for beating cream and egg white, 

making biscuit dough, puddings, cocktails, cream, 

mayonnaise, puree and sauces and for mixing liquid 

products.

Note:

 you can install the beaters (2) into any installation 

openings (3).
•  Make sure that the operation mode switch (5) is set 

to the position «0», and the power plug is not inserted 

into the mains socket.

•  Insert the dough hooks (1) or the beaters (2) into the 

corresponding installation sockets (3) until clicking. 

Both attachments should be fixed in the mixer 

openings.