Bosch MFQ3650X - Инструкция по эксплуатации - Страница 15

 15

 en

 Cleaning

2. 

Insert the required pair of tools in the 

apertures and press on the tools until 

they engage.

a.  Note the shape of the plastic parts 

on the tools to avoid mixing them 

up. 

b.  Insert tools one after the other to 

stop them from getting caught!

3. 

Insert the mains plug.

4. 

Insert the tools in the receptacle and 

switch the appliance on at the required 

level.

–

Level 1, 2: 

for working in and mixing in.

–

Level 3, 4, 5: 

for kneading and beating.

–

Instantaneous switching M

: for mixing 

or beating ingredients quickly.

5. 

Move the mixer to and fro in the bowl 

while mixing. Never reach into the 

rotating tools.

6. 

As soon as the desired consistency is 

achieved, set the switch to 

0

 and wait 

for the appliance to come to a standstill. 

7. 

Pull out the mains plug.

8. 

Release and remove the tools by press-

ing the ejector button. The ejector button 

cannot be actuated unless the switch is 

in the 

0

 position.

Base unit with high-speed hand 

blender

The high-speed hand blender is suitable for 

blending mayonnaise (only whole eggs), 

sauces, mixed drinks, baby food, cooked 

fruit and vegetables. For puréeing soups.
Use the universal cutter for cutting/chopping 

raw food (onions, garlic, herbs).

X

Fig.

C

1. 

Move slider to position “

x

”. The rear 

aperture is open, the apertures for 

inserting the tools are closed.

2. 

Insert the high-speed hand blender and 

lock into position.

3. 

Place the high-speed hand blender in 

the receptacle. To prevent food from 

splashing, immerse the high-speed 

hand blender in the food before switch-

ing on the appliance.

Warning!

Do not immerse the appliance in liquid 

above the joint between the high-speed 

hand blender and base unit.

4. 

Insert the mains plug. Turn the switch to 

setting 

M

 and hold. 

5. 

Process the ingredients as required.

Tip:

 The high-speed hand blender works 

better if there is some liquid between the 

ingredients being processed.

6. 

Release the switch. 

Tip: 

To make cleaning the high-speed hand 

blender easier, after use place it in a recep-

tacle containing clean water and briefly turn 

the switch to setting 

M

 several times.

7. 

Pull out the mains plug.

8. 

Remove the high-speed hand blender 

by simultaneously pressing both release 

buttons. When doing so, hold the lock of 

the rear aperture in place to prevent the 

high-speed hand blender from jamming.

Cleaning

The appliance and the accessories used 

must be thoroughly cleaned after each use. 

X

 Table

E

W

Risk of electric shock!

Disconnect the mains plug before

cleaning.

Warning!

■

Do not use cleaning agents containing 

alcohol or spirits.

■

Do not use sharp, pointed or metal 

objects.

■

Do not use abrasive cloths or cleaning 

agents.

■

Clean 

the base unit

 with a soft, damp 

cloth and then rub dry. 

■

Clean the 

high-speed hand blender

in the dishwasher or with a brush under 

running water. Never clean blades with 

bare hands. Leave the high-speed hand 

blender to dry in an upright position 

(blender foot blade at top) so that any 

water inside can run out. 

X

Fig.

F

X

Fig.

G

■

The power cord can be wound up for 

storage of the appliance.