Микроволновые печи VITEK VT-1694 SR - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
16. Lock mode pictograph
17. Product weight pictograph
18. Defrost mode pictograph
19. Microwave cooking mode pictograph
20. Combination cooking mode 1 pictograph
21. Operating at 100 and 80% power pictograph
22. Combination cooking mode 2 pictograph
23. Operating at 60, 40 and 20% power pictograph
Control panel
Display
Shows cooking time, power, operating modes pictographs and current time.
Power
It is used to set power level. Select the power level in the following order: 100%, 80%, 60%, 40%, 20%, and 00%.
To check the preset power level while cooking press the Мощность (Power) button, the preset power level will be lighting
on the display for 5 seconds.
Grill
Use to switch on Grill
Combo
Selection of combination cooking modes COMB1 and COMB2.
Weight
Setting of product weight in auto cooking mode.
Defrost
Defrost in auto mode with preset product weight.
Timer
Switching on the timer without switching on the oven.
Clock
12-hour or 24-hour format selection, time setting.
Stop/Cancel
Press it to cancel the preset power level, cooking program or defrost time.
Note: the Стоп/Отмена (Stop/Cancel) button does not cancel the current time.
Время/меню/Стоп (Time/Menu/Stop)
Select auto cooking menu, set the current time or cooking time by turning the knob. To switch on the oven press the knob.
Microwave oven assembly
Remove the package and accessories from the operating chamber. Check the oven whether there is deformation or not. Pay
special attention to the door state. If there is some problem do not set and do not switch on the oven.
Protective covering
Case:
If there is protective covering, remove it from the surface.
Do not remove light grey mica plate inside the operating chamber; it serves to protect the magnetron.
Setting the mica tray
1. Set the glass tray rotary actuator (4) in the opening situated on the bottom of the operating chamber.
2. Carefully set glass tray (5), by matching ledges and grooves of the support. Never set the glass tray with its bottom upside
down.
• Do not prevent rotation of the glass tray while operating the oven.
• During cooking always use glass tray and tray support.
• Products and cookware should be always set only on the glass tray.
• The glass tray can rotate clockwise/anti clockwise. It is normal.
• If cracks or chops appear immediately replace the glass tray.
ENGLISH
1694.indd 6
1694.indd 6
07.03.2007 15:13:09
07.03.2007 15:13:09
