Микроволновые печи VITEK VT-1682 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
ENGLISH
Glass tray installation
1. Place the glass tray support (4) into the opening in the oven chamber bottom.
2. Place the roller ring (5) onto the chamber bottom.
3. Accurately install the glass tray (6), aligning its protrusions with the support grooves.
Never install the glass tray with the lower side up.
• Do not impede the glass tray rotation during the operation.
• When cooking products, always use the glass tray, roller ring and tray support.
• Put products and dishes only on the glass tray.
• The glass tray can rotate clockwise/anticlockwise. This is normal.
• If any cracks or chips have appeared on the tray, replace the tray immediately.
Installation
• Before connecting the microwave oven to the power supply socket, make sure that oven
operating voltage and power consumption correspond to the parameters of the local
power supply. Connect the oven to the power supply socket which has reliable ground-
ing.
• Place the oven onto a flat, stable surface. Try to select a place away from the reach of
small children.
• Install the oven so that to leave no less than 7-8 cm interval between the oven’s back and
side covers and the wall, free space above the oven should be no less than 30 cm.
• Do not remove supports from the microwave oven bottom cover.
• Do not close ventilation openings on the oven housing.
• The microwave oven should be placed away from TV and radios, to prevent interference
when receiving TV and radio broadcast.
WARNING:
Do not install the microwave oven onto a heated surface (kitchen oven) or other
sources of heat.
If the microwave oven is broken because of improper use, the user will be deprived of the
free guarantee right.
MICROWAVE OVEN OPERATION
Sound signal
Each pressing of a control panel button is confirmed with a sound signal.
Setting the time
1. Press the “Clock/Preset” button, the “0:00” symbol will appear on the display, hour digits
will flash.
2. Use the “+” and the “-“buttons to set hours from 0 to 23.
3. Press the “Clock/Preset” button to confirm, minute digits will be flashing.
4. Use the “+” and the “-“buttons to set minutes from 0 to 59.
5. Press the “Clock/Preset” button to confirm, “:” symbols will be flashing.
Note:
1. If the hours are not set, the current time will not be displayed.
2. If during setting the current time you will press the “Stop/Cancel” button, you will
return to the previous mode.
8
1682.indd 8
1682.indd 8
09.04.2010 14:23:39
09.04.2010 14:23:39
