VITEK VT-1663 BK - Инструкция по эксплуатации - Страница 7

7

ENGLISH          

Installing the glass rotary bottom plate

1.  Open the oven door (2) by pressing the button (8).
2.  Set the roller support (3) of the glass rotary bottom plate into the opening located in the bottom of the oven cavity.
3.  Carefully set the glass rotary bottom plate (4) on the roller support (3). Never set the glass rotary bottom plate 

with its bottom side up.

Note:

•

Do not hinder rotation of the glass rotary bottom plate (4) while oven operation.

•

Always use the glass rotary bottom plate (4) and the roller support (3) when cooking.

•

Food and cookware should be always placed only on the glass rotary bottom plate (4).

•

During operation of the oven the glass rotary bottom plate (4) can rotate clockwise or counterclockwise.

•

If cracks or shears appear on the glass rotary bottom plate (4), replace it immediately.

INSTALLING THE MICROWAVE OVEN

–  Before  switching  the  unit  on,  make  sure  that  the  operating  voltage  and  input  power  of  the  unit  correspond  to 

your mains specification.

–  Connect the microwave oven to a mains socket with reliable grounding contact.
–  Set the microwave oven on a flat and hard surface that will bear its weight and maximal weight of the products 

which will be cooked in it.

–  Do not install the unit in places with high moisture and temperature, and near inflammable objects.
–  Set the unit in places out of reach of children.
–  Place the microwave oven keeping at least a 20 cm gap from the sides and the rear of the oven to the wall and a 

30 cm gap above the unit.

–  Do not remove the supporting legs from the bottom of the oven.
–  Do not block ventilation openings in the unit body.
–  It  is  necessary  to  place  the  microwave  oven  away  from  TV-sets  or  radio  receivers  to  avoid  interferences  in  the 

reception of TV and radio signals.

WARNING: 
In  case  the  oven  is  damaged  due  to  the  user,  the  user  is  deprived  of  the  right  for  free  warranty  mainte-
nance and repair of the unit.

MICROWAVE OVEN OPERATION
Current time setting

1.  Insert the power plug into the mains socket.
2.  Press the 

«Clock»

 button (12), the 24 hour time format symbols («Hr 24») will be shown on the display (6).

3.  To change the time indication format to 12 hours, press the 

«Clock»

 button (12) again, the symbols «Hr 12» will 

appear on the display. Skip this step if you want to keep the 24 hour time format. 

4.  Use the buttons (11) to set the current time in hours and minutes.
5.  To save the settings, press the 

«Clock»

 button (12).

Notes: 

–  If you have not saved the settings, then 20 seconds after the last pressing of the buttons the unit will be switched 

to the previous settings.

–  If you press the 

«Reset»

 button (15) during time setting, the unit will be switched to the previous settings.

–  Press the 

«Clock»

 button (12) to see the current time during cooking.

DELAYED START FUNCTION

This unit allows not only to choose a cooking program, but also the cooking start time. The delayed start function is 
set with the «Timer» button (16) (see «Cooking in the microwave oven»).

COOKING IN THE MICROWAVE OVEN

Before  you  start  cooking,  set  the  necessary  cooking  mode,  microwave  power  level,  cooking  time,  or  choose  an 
automatic cooking program. 

General information

–  Insert the power plug into the socket and set the current time.
–  Open the door (2), pressing the button (8), and put the products into the oven cavity. To prevent the oven cavity 

from getting dirty, cover the products with a microwave-safe protective lid. Close the door.

–  Set a cooking program or switch an automatic cooking program on (see below).

VT-1663_RUS.indd   7

11.02.2014   12:50:58