Mikrotik LtAP LTE6 kit (RBLTAP-2HND R11E-LTE6) - Инструкция по эксплуатации
Роутер Mikrotik LtAP LTE6 kit (RBLTAP-2HND R11E-LTE6) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались дополнительные вопросы — свяжитесь с нами через контактную форму.
LtAP LTE6 kit
The LtAP LTE6 kit is a wireless access point with three SIM card slots for cellular data modems.
Quickstart
Please follow these quick steps to set up your device:
Unscrew two screws and remove doors to access all ports. Please see
Connect your Internet cable to the Ethernet port (this is optional if using LTE as the primary connection).
Insert the SIM card into the SIM 2 slot (middle).
Connect GPS antenna (optional),(see
).
Mount unit in your desired place (see
).
Choose your powering solution (see
).
Set your computer IP configuration to automatic (DHCP).
From your PC or smartphone, connect to the wireless network name which starts with “MikroTik”.
Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
configuration, since there is no password by default, you will be logged in automatically.
We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest
version to ensure the best performance and stability.
Choose your country, to apply country regulation settings and set up your password in the screen that
loads.
Extension slots and ports
•
Built-in 2 GHz wireless access point module, AP/station/bridge/p2p modes are supported. Onboard PIF
antennas built in, as well as MMCX connectors for external antennas (software selectable).
•
Two miniPCIe slots and three SIM slots.
•
Built-in GPS module with an external SMA connector.
•
Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or
crossover cable can be used for connecting to other network devices. The Ethernet port accepts 12-30 V
DC powering from a passive PoE injector.
•
One DB9 RS232 serial port for serial console access. Configured as 115200 bit/s, 8 data bits, 1 stop bit, no
parity.
•
One USB 2.0 port for storage devices or cellular modems.
See mikrotik.com/products for the latest version of this document.
Page 1, Document #49495 Modified on: 19.DEC.2019
"Загрузка инструкции" означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
