Mikrotik cAP ac (RBCAPGI-5ACD2ND) - Инструкция по эксплуатации

cAP ac

The cAP ac is a ceiling mountable wireless access point. It is already configured, you can simply plug in your ISP
cable and start using wireless Internet. We recommend you to set up a password to secure your device.

Connecting

•

Remove metal ring see

Removing mounting ring

;

•

Connect POE to the Ethernet port 1, please see

Powering

section for instructions on how to connect POE.

•

Set your computer IP configuration to

automatic

(DHCP).

•

The device wireless access point mode is enabled by default.

•

The device will boot up and Wireless network will be available for connecting.

•

Open network connections on your PC, mobile phone or other device and search for MikroTik wireless
network and connect to it.

•

Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
configuration, user name: admin, since there is no password by default, you will be logged in automatically.

•

We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest
version to ensure the best performance and stability.

•

Choose your country, to apply country regulation settings and set up your password on the screen that
loads.

Removing mounting ring

The Mounting ring comes installed on the device, in order to access Ethernet ports please remove it by turning it
counterclockwise and the ring will be released.

Powering

The device accepts power from the Ethernet port, so you must either use the included passive PoE injector or
make sure your switch supports passive or 802.3af/at PoE output.

•

Ethernet port accepts 12-57 V DC

⎓

(802.3af/at or Passive PoE).

The power consumption under maximum load can reach 13 W.
Connecting to a POE Adapter:

1. Connect the Ethernet cable from the device to the POE port of the POE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data

and power flow.

3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

See mikrotik.com/products for the latest version of this document.

Document #50187 Modified on: 05.NOV.2019