Canon MF3010 - Инструкция по эксплуатации - Страница 84

   Installation Requirements and Handling

In order to use this machine in a safe and trouble-free manner, install the machine in a place that ful

fi

 lls the 

following conditions. Also, read the remarks carefully.

Temperature and Humidity Conditions

▪

Temperature range: 10 to 30°C

▪

Humidity range: 20 to 80 % RH (no condensation)

 IMPORTANT

Protecting the machine from condensation

▪

To prevent condensation from forming inside the machine in the following cases, let the machine adjust to 
the ambient temperature and humidity for at least two hours before use.

- When the room where the machine is installed is heated rapidly

- When the machine is moved from a cool or dry location to a hot or humid location

▪

If water droplets (condensation) form inside the machine, this can result in paper jams or poor print quality.

When using an ultrasonic humidi

fi

 er

When you are using an ultrasonic humidi

fi

 er, it is therefore recommended that you use puri

fi

 ed water or other 

water that is free of impurities.
If you use tap water or well water, impurities in the water will be dispersed through the air. This can be trapped 
inside the machine, causing degradation in print quality.

Power Supply Requirements

220 to 240 V, 50/60 Hz

 IMPORTANT

Precautions when connecting the power cord

▪

Do not connect this machine to an uninterruptible power source.

▪

Use an AC power outlet exclusively for the machine. Do not use the other sockets of the AC power outlet.

▪

Do not plug the power plug into the auxiliary outlet on a computer.
Do not use the same AC power outlet for both the machine and any of the following equipment.

- Copy machine

- Air conditioner

- Shredder

- Equipment that consumes a large amount of electricity

- Equipment that generates electrical noise

▪

When unplugging the power cord, keep interval of 5 seconds or more before plugging it again.

Miscellaneous precautions

▪

The maximum power consumption of the machine is 960 W or less.

▪

Electrical noise or a dramatic drop in supplied voltage may cause the machine or computer to operate 
incorrectly or lose data.

Installation Requirements

▪

A location with suf

fi

 cient space

▪

A location with good ventilation

▪

A location with a 

fl

 at, even surface

▪

A location able to fully support the weight of the machine

 IMPORTANT

Do not install the machine in the following locations, as this may result in damage to the machine.

▪

A location subject to dramatic changes in temperature or humidity

▪

A location subject to condensation

▪

A poorly ventilated location
(If you use the machine for a long time or to perform a large amount of printing in a poorly ventilated room, 
the ozone or other odors generated by the machine may create an uncomfortable working environment. 
In addition, chemical particles are dispersed during printing; therefore, it is important to provide adequate 
ventilation.)

▪

A location near equipment that generates magnetic or electromagnetic waves

▪

A laboratory or location where chemical reactions occur

▪

A location exposed to salt air, corrosive gases, or toxic gases

▪

A location, such as on a carpet or mat, that may warp from the weight of the machine or where the machine 
is liable to sink.

Maintenance and Inspections

 IMPORTANT

▪

Follow the instructions in the caution label attached to this machine.

▪

Avoid shaking or applying a shock to this machine.

▪

To prevent a paper jam, do not turn the power ON/OFF, open/close the operation panel or rear cover, and 
load/unload paper in the middle of printing operation.

▪

Be sure to remove the toner cartridge from the machine when transporting the machine to a distance.

▪

To avoid exposing the toner cartridge to light, place it in the protective bag included with this machine or 
wrap it in a thick cloth.

▪

Clean this machine regularly. If this machine becomes dusty, it may operate improperly.

▪

The repairing parts and toner cartridges for the machine will be available for at least seven (7) years after 
production of this machine model has been discontinued.

   Legal Notices

Model Names

MF3010 (F162100)

WEEE Directive

European Union (and EEA) only.
This symbol indicates that this product is not to be disposed of with your household waste, according to the 
WEEE Directive (2002/96/EC) and your national law. This product should be handed over to a designated 
collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized 
collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of 
waste could have a possible negative impact on the environment and human health due to potentially hazardous 
substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal 
of this product will contribute to the effective usage of natural resources. For more information about where you 
can drop off your waste equipment for recycling, please contact your local city of

fi

 ce, waste authority, approved 

WEEE scheme or your household waste disposal service. For more information regarding return and recycling of 
WEEE products, please visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)

English

5