Canon G2420 - Инструкция по эксплуатации - Страница 6

4

Setting Up the Printer

9 

Close the scanning unit / cover.

• 

Open the scanning unit / cover fully and then close it.

b

a

 Caution

Watch your fingers.

10 

When the following screen appears, use the 

[

and 

]

 buttons to select 

Yes

, and then press the 

OK

 button.

• 

Please wait momentarily until the following screen 
appears. Follow the on-screen instructions, and then 
press the 

OK

 button.

If you will use the printer without connecting any other 
devices, setup is now complete.

Select the connection method that best matches how you 
will use the printer.

• 

To use the printer without connecting to any other 
devices

  Setup is now complete.

• 

To use the printer connecting to a computer

  Proceed to the next page.

Check the support code, and then follow the 
instructions if the displayed code is written below.

• 

1890

Protective material remaining.

 "2. Removing Packing Materials" on page 1

• 

1470

Print heads are not installed correctly.

 "3. Installing the Print Heads" on page 1

• 

1471

Print heads cannot be recognized.

 "3. Installing the Print Heads" on page 1

• 

5200

Ink system preparation was not completed successfully. 

Press the 

ON

 button to restart the printer, and then see "5. 

Pouring Ink" on page 3.

For all other cases, refer to the 

Online Manual

.

If an error message (support code) appears on 

the screen

Support code