Метеостанции RST 02876 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an Auto-scroll function. While the Auto-scroll function is set, the unit will
automatically cycle to display the temperature of each remote sensor for 6 seconds.
1.
To retrieve manually the specific sensor temperature and humidity reading, press [
CHANNEL
] key
until desired channel number is displayed.
2.
To enable Auto-scroll function, use [
CHANNEL
] button to select channel 1, 2, ... until Auto-scroll
icon appears on the left hand corner of the 3rd line display.
SET THE CLOCK, CALENDAR & LANGUAGE
1.
Press & hold [
CLOCK
] button for 2 seconds to enter clock setting mode. Flashing 24 hours will
appear.
2.
Press [
] or [
] button to switch between 24 hours and 12 hours format, and then press
[
CLOCK
] button to confirm.
3.
The hour digits will flash. Use the [
] button to increase by one hour or [
] button to decease
by one hour to your desired hours. Holding down either button will change the increment unit rap-
idly. Press [
CLOCK
] button to confirm.
4.
The minute digits will flash. Use the [
] or [
] button to set your desired minute. Holding down
either button will change the increment unit rapidly. Press [
CLOCK
] button to confirm.
Note
: Every change of minute digit will automatically reset the seconds to zero.
5.
The year digit will flash and Yr icon appears. Press [
] or [
] button to set your desired year.
Press [
CLOCK
] button to confirm.
Note
: Year range is from 2000 to 2099.
6.
D and M icons will flash. Press [
] or [
] to select D M (Date Month) or M D (Month Date) for-
mat. Press [
CLOCK
] button to confirm.
7.
Month digits will flash. Press [
] or [
] button to set your desired month. Press [
CLOCK
] but-
ton to confirm. Do the same to set Date.
Note
: The moon phase and the weekday will be automatically calculated and displayed for the
date set above.
8.
E digit will flash. Press
[
] or [
] button to switch 5 languages display of weekday
(English/Italian/Spanish/French/German. See table 1). Press [
CLOCK
] button to confirm and exit
setting mode.
Table 1
17
Note
: If no key press during setting mode for 10 seconds, it will automatically keep the setting and
exit to normal display.
Как включать свет?