FIRST AUSTRIA FA-2461-5-BA - Инструкция по эксплуатации - Страница 2

2

3

ENGLISH

FEATURES:

•  Manual time setting.

•  Continuous calendar up to year 2099.

•  Date and weekday display.

•  Temperature alternatively in °C or °F.

•  Time in optional 12/24 hour format.

•  Weekday display in 7 languages: English, 

German, Italian, French, Spanish, 

Netherlands, and Danish 

•  Automatic snooze function (5 minutes).

•  Thermometer: Indoor measurement ranges: 

0°C (32°F) ~ 50°C (122°C)

  outdoor measurement ranges: -19.9°C 

(-3.8°F) ~ 59.9°C (139.8°F)

•  Display Hi/Lo Outdoor Temperature

•  Hygrometer: measurement range: 20% ~ 

95% RH. Separate display of indoor use. 

•  LED back light display (auto off after 

5 seconds).

•  Battery: 2 x AA /LR6 (not Included).

LCD SCREEN AND SETTINGS:

(Fig. A)

1.  Weather forecast

2. 

Indoor temperature in °C/°F values

3. 

RF icon

4.  Outdoor temperature in °C/°F values

5. 

Indoor hygrometer values

6.  Summer season

7.  Time zone

8. 

12/24 hour format

9.  Alarm 1 icon

10. 

Time

11. RCC icon

12. SNOOZE icon

13. Week

14. Date

15. Cozy icon 

FUNCTION KEYS 

(Fig. B)

:

16. Alarm key

17. Set key

18. Snooze/Light key

19. Up key

20. 

Down key

21. Wave key

WIRELESS OUTDOOR SENSOR

Part C –Wireless Outdoor Sensor

C1: Wireless Outdoor Sensor battery 

compartment

Wireless remote sensor (transmitter)

•  Transmitter frequency: 433.92 MHz.

•  Range of transmission is up to 60m 

(200 feet).

•  Insert the 2 batteries in to the transmitter. Pay 

attention to observe the correct polarity.

INITIAL OPERATION:

•  Obstacles can severely impair the of the 

transmission

•  Protect the transmitter against any direct 

sunlight penetration

•  Open the battery compartment on the rear 

side of the outdoor remote sensor and insert 

the batteries. Pay attention to observe the 

correct polarity. Select the °C/°F display by 

pushing the button inside the compartment. 

Close in the battery compartment

•  Open the battery compartment on the rear 

side of the receiver and insert the batteries. 

Pay attention to observe the correct polarity. 

Close the battery compartment.

•  When you insert the batteries, all the icon 

on the LCD display will briefly light up for 3 

seconds, and you will hear a beep tone, and 

detect indoor temperature & humidity.

•  The receiver will now start to make a 

connection to the outdoor remote sensor. 

This operation takes about 3 minutes and is 

displayed by a flashing reception RF antenna 

symbol in the “OUTDOOR” display area on 

the receiver.

•  After receiver has created a connection to the 

outdoor remote sensor, it will then b enters 

the clock mode.

MANUAL TIME SETTING:

•  Press and hold down the “SET” button for 

2 seconds, the Year display 2012 starts to 

flash. Now use “▲” and “▼” buttons to set the 

correct year.

•  Press “SET” to confirm your setting, the 

Month display starts to flash. Now use “▲” 

and “▼” buttons to set the correct month.

•  Press “SET” to confirm your setting, the Date 

display starts to flash. Now use “▲” and “▼“ 

buttons to set the correct date.

•  Press “SET” to confirm your setting, the 

language selection for the Weekday displays 

starts to flash. Now use “▲” and “▼“ buttons 

to select a language.

•  Press“SET”to confirm your setting, the Time 

zones start to flash, Now use ”▲” and “▼” 

buttons to set a correct time zone (-12 to 

+12).

ENGLISH

•  Press “SET” to confirm your setting, the 12/24 

hour mode display starts to flash. Now use 

“▲” and “▼“ buttons to set the correct 12/24 

hour mode.

•  Press “SET” to confirm your setting, the Hour 

display starts to flash. Now use “▲” and “▼“ 

buttons to set the correct hour.

•  Press “SET” to confirm your setting, the 

Minute displays starts to flash. Now use “▲” 

and “▼“ buttons to set the correct minute.

•  Press “SET” to confirm your setting and to 

end the setting procedures, enter the clock 

mode.

F.Y.I.:

•  After 7 seconds without pressing any button, 

the clock switches automatically from Set 

Mode to Normal Time Mode.

•  There are 7 languages of Weekday: English, 

German, Italian, French, Spanish, Dutch and 

Danish.

SETTING THE DAILY ALARMS:

•  under the clock mode, press once ALARM 

button, LCD display the “



” icon.

•  Press and hold down the ALARM button for 

2 seconds until Alarm Time flashing icon is 

displayed. Now use the “▲” and “▼“ buttons 

to select the alarm time you require and 

briefly press the ALARM button to set this 

Alarm time.

•  The Hour display of the Alarm time starts to 

flash. Use the “▲” and “▼“ buttons to set 

the required hour. Press ALARM button to 

confirm your setting

•  The Minute display of the Alarm time starts 

to flash. Use the “▲” and “▼“ buttons to set 

the required minute. Press ALARM button to 

confirm your setting and to end the setting 

procedure.

•  To activate or deactivate the daily alarms, 

briefly press the “ALARM” button once.

F.Y.I.: 

•  After 7 seconds without pressing any button 

the clock switches automatically from setting 

mode to Normal clock mode.

•  The alarm will sound for 1 minutes if you 

do not deactivate it by pressing any button. 

In this case the alarm will be repeated 

automatically after 24 hours.

•  Rising alarm sound (crescendo, duration: 

1 minutes) changes the volume 4 times whilst 

the alarm signal is heard.

Automatic SNOOZE function: 

•  To activate the automatic snooze function: 

While the alarm is sounding, press the 

“SNOOZE/LIGHT” button to activate the 

snooze function. When the snooze function 

is activated, the “Zz” symbol appears in the 

display.

•  This operation moves the alarm back by 

5 minutes and the alarm will restart at this 

time. 

°C/°F temperature display

•  The temperature is displayed either in °C/°F. 

Briefly pressing the “▼” button allows you to 

switch between the individual modes.

Radio connection to outdoor sensor:

Insert the 2 batteries in to the transmitter, Pay 

attention to observe the correct polarity. One 

sensor is suplied with your receiver

•  Press and hold down the “▼“ button for 2 

seconds to search for outdoor sensors (to 

erase the current data inside the RC clock).

Backlight:

•  Briefly press the SNOOZE/LIGHT button to 

activate the display lighting for 5 seconds.

Weather forecast

•  The weather forecast is calculated base on 

the following humidity & temperature data 

and may deviate from the actual weather 

conditions if the station in central heating 

room or the humidity & temperature record is 

big different from the real natural state.

Please see table 
When forecasting the weather, the station has 

4 icons: sunny, light cloudy, cloudy and rainy 

Storage

It is recommended to store in a covered and dry 

place at an ambient temperature not higher than 

+ 40°C with relative humidity above 70% and the 

absence in the environment of dust, acid and 

other vapours.

Weather forecast 

(Table)

sunny

lightly cloudy

cloudy

rainy