MSI H610 - Инструкция по эксплуатации - Страница 13

12

DIMM Slots

Please install the memory module into the DIMM slot as shown below.

⚠

Important

∙

To ensure system stability for Dual channel mode, memory modules must be of the 

same type, number and density. 

∙

Some memory modules may operate at a lower frequency than the marked value 

when overclocking due to the memory frequency operates dependent on its Serial 

Presence Detect (SPD). Go to BIOS and find the 

DRAM Frequency

 to set the memory 

frequency if you want to operate the memory at the marked or at a higher frequency.

∙

It is recommended to use a more efficient memory cooling system for full DIMMs 

installation or overclocking.

∙

The stability and compatibility of installed memory module depend on installed CPU 

and devices when overclocking.

∙

Please refer to www.msi.com for more information on compatible memory.

1

3

2

2