GIGABYTE GA 8VM800PMD 775 RH - Инструкция по эксплуатации - Страница 73

Appendix

- 73 -

English

Figure 18

Figure 19

Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 18 below
will appear. If you want to install Windows XP, use the ARROW keys to select 

VIA VT8237/6421/6410

SATA RAID Controller

 and press ENTER

.  

Then it will begin to load the SATA driver from the floppy

disk.

Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk. The driver installation will be finished in about one minute.

If a message appears saying one or some file(s) cannot be found, please check the floppy
disk or copy the correct SATA driver again from the motherboard driver CD.

Windows Setup

 ENTER=Select   F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.

VIA VT8237/6421/6410 SATA RAID Controller(Windows XP/SRV 2003)
VIA VT8237/6421/6410 SATA RAID Controller(Windows 2K)
VIA VT8237/6421/6410 SATA RAID Controller(Windows NT4)

Windows Setup

S=Specify Additional Device   ENTER=Continue   F3=Exit

Setup will load support for the following mass storage device(s):

VIA VT8237/6421/6410  STAT  RAID  Controller(Windows  XP/SRV  2003)

   * To specify additional SCSI adapters, CD-ROM drives, or special

 disk  controllers for use with Windows, including those for
 which you have a device support disk from a mass storage device
 manufacturer, press S.

   * If you do not have any device support disks from a mass storage

 device manufacturer, or do not want to specify additional
 mass storage devices for use with Windows, press ENTER.