Материнские платы GIGABYTE GA 8I865PE775 G RH rev 3 0 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 45 -
English
AGP/PCI Fixed
This item will be available when "CPU Host Clock Control" is set to Enabled.
Serial ATA device is very sensitive to SRC clock. SRC over clock may make Serial ATA device
function can't work properly.
Adjust AGP/PCI clock asychrohous with CPU.
Memory Frequency For
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue.
Memory Frequency (Mhz)
The values depend on "CPU Host Frequency(Mhz) and Memory Frequency For" item.
AGP/PCI Frequency (Mhz)
The values depend on AGP/PCI/SRC Fixed.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal
Supply DIMM voltage as DIMM reauires. (Default value)
+0.1V ~ +0.6V
Increase DIMM voltage by +0.1V to +0.6V.
Incorrect using it may cause your system broken. For power End-User use only!
AGP OverVoltage Control
Normal
Supply AGP voltage as AGP reauires. (Default value)
+0.1V ~ +0.3V
Increase AGP voltage by +0.1V to +0.3V.
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when
enable this feature.
CPU OverVoltage Control
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the memory may occur.
Normal
Supply CPU voltage as CPU reauires. (Default value)
1.8V
Set CPU OverVoltage Control to 1.8V.
2.0V
Set CPU OverVoltage Control to 2.0V.
Incorrect using it may cause your system broken. For power End-User use only!
FSB OverVoltage Control
Please note that by overclocking your system through the increase of the FSB voltage, damage
to the memory may occur.
Normal
Supply FSB voltage as FSB reauires. (Default value)
+0.1V ~ +0.3V
Increase FSB voltage by +0.1V to +0.3V.
Incorrect using it may cause your system broken. For power End-User use only!
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore Voltage.
