Материнские платы GIGABYTE GA 770TA UD3 rev 1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 42 -
Trfc3 for DIMM4
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~8T, 10T, 12T.
Precharge Time
Options are: Auto (default), 4T~7T.
Row Cycle Time
Options are: Auto (default), 11T~42T.
RAS to RAS Delay
Options are: Auto (default), 4T~7T.
Bank Interleaving
Enables or disables memory bank interleaving.
Enabled
allows the system to simultaneously access dif-
ferent banks of the memory to increase memory performance and stability. (Default: Enabled)
Channel interleave
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages.
Auto
lets the BIOS automatically set the
system voltages as required.
Manual
allows all voltage control items below to be configurable. (Default:
Auto)
DRAM Voltage Control
Allows you to set the memory voltage.
Normal
Supplies the memory voltage as required. (Default)
1.500V ~ 2.400V
The adjustable range is from 1.500V to 2.400V.
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
DDR VTT Voltage Control
Normal
Supplies the memory VTT voltage as required. (Default)
0.900V ~ 1.300V
The adjustable range is from 0.900V to 1.300V.
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory
NB Voltage Control
Allows you to set the North Bridge voltage.
Normal
Supplies the North Bridge voltage as required. (Default)
1.100V ~ 1.800V
The adjustable range is from 1.100V to 1.800V.
SB/HT Voltage Control
Allows you to set the South Bridge/HT-Link voltage.
Normal
Supplies the South Bridge/HT-Link voltage as required. (Default)
1.200V ~ 1.580V
The adjustable range is from 1.200V to 1.580V.
