Elenberg FM-5630 - Инструкция по эксплуатации - Страница 3

3

6.  To dean foot bath, rinse with water. (Never submerge unit in water.) Wipe with a damp cloth. Do not use any strong chemical cleaners

such as Benzine.

7.  Foot bath can also be used as a dry foot massager without water.

8.  Fill Footbath with warm water or cold water to the level indicator “Max”. Do not fill above water-level indicator, Never overfill.

9.  Pouring water out of the footbath from the line cord side only.

How To Use

1.   3 push switiches is used to control different settings with LED indications. (Fig 1)

2.   Variable water heatup control is done by an individual rotary switch.This switch only function after the water heatup switch is pushed on.

There is a 2-colour LED for indicating the approximately water temp, after water heatup is switch on,The Green LED is “ON” to indicate
that water is heatup. When selected temp, is reached the Green LED will change to Red to indicate “heater cutoff”. The 2 Red-Green LED
will keep changing to refect the heater on & off to keep water temperature. Water temperature is controlled from “MIN” 30°C to “ MAX”
50°C approximately. (Fig 2)

3.   2 interchangeable massage attachments

•    

Rollers massage rejuvenating your feet

•    

Accunodes massage stimulating your feet.

4.    Translucent splash cover.

5.    6' line cord with wrap feature.

6.   Hundred of accunodes on the bottom of unit for stimulating your sole of feet.

7.   Large infrared heat provide deep penetrating heat therapy to your feet, for using infrared heat, always switch to the position of infrared

heat function.

8.    For 

“DRY MASSAGE” 

use position 

“1” only.

9.

   POWERFUL DUAL WATERJET

 Providng powerful and specific hydromassage for your foot to relax your foot muscle.

Recommended Massaging Times

Generally massage should not last longe rthan 10 -15 minutes. Treatment may be applied once or twice daily as desired. Allow unit to cool
before using again. As a person’s metabolism varies, so does his or her responseto massage. You will soon adjust your massage time to suit
your needs and personal comfort. If you have any concerns regarding treament, we recommend you consult your physician.

Pour in 3 liter of water and press water heatup switch. Put your foot into the massage tub. Then you will feel the temp, increase slowly. If the
water is freezing at your home, you should use water of room temp to achieve the mentioned result.

REMEMBER TO USE THE WATER HEATUP FUNCTION ONLY WITH WATER FILL INTO THE MASSAGE TUB.

  Waterjet

  Massage + Heat + Infrared Heat

  Bubble + heat + Water Heatup

Remark:

 Remember to use 3 litre of water to start the water heatup function.