Beurer MG55 - Инструкция по эксплуатации - Страница 13

13

7. Start-up

•  Remove the packaging.

•  Check the device, power supply and cables for damage.

•  Connect the device to the mains power supply. The device must be switched off.

•  Route the cable safely so that there is no risk of anyone tripping over it.

8.  Use  

Make sure that the device is switched off before inserting the power cable. Switch on the device by rotating 

the controller clockwise past the detent.

Set the desired massage speed using the control. 

The 

Heat function

 can be switched on using the “Heat” button. 

Replace the massage attachments by rotating the attachment on the product in an anti-clockwise direction 

and replacing. Fix the newly positioned massage attachment in place by rotating it in a clockwise direction. 

Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down 

and can massage yourself or another person. The massage intensity can be altered by pressing more or less 

firmly with the massage device. Do not massage a certain site of the body for longer than 3 minutes and 

then change to other area of the body.

 Note

Do not use the massage device just before going to bed. The massage can also have a stimulating 

effect and may cause difficulties in getting off to sleep.

 WARNING

•   The massage must be pleasant and relaxing at all times. Stop the massage or change the position 

of the massage device if you find it is painful or unpleasant.

•   Do not jam or force any part of your body, in particular your fingers, into the area of the massage 

head.

9. Care and storage

Cleaning

First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly 

moistened. You can also use a mild detergent. 

 WARNING

•   Disconnect the device before cleaning it.

•   Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the 

device or accessories.

•   Do not use the device again until it is completely dry.

Storage

Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend 

storing the device in its original packaging.

10. In the event of problems?

Problem

Cause

Remedy

Massage head does 

not move.

Appliance not connected

to the power supply.

Connect the plug to the mains supply and

switch on the appliance. 

Device does not move.

Switch on the appliance.

Overheating protection

tripped.

Disconnect device from mains power, wait at 

least 15 minutes, plug in again and switch on.