Машинки для стрижки Zelmer 39Z014 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
44
Do not place the hair clipper on wet surface or cloth during operation.
–
Do not place or store the device in the area where it can fall into water.
–
Do not use the device with damaged comb attachment. It can cause injuries hazard.
–
Never try to remove the foreign bodies out of the clipper using sharp objects (i.e. comb).
–
Always clean after using.
–
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
–
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
–
Do not apply not recommended attachments.
–
The hair clipper can be used both as a mains and cordless device.
–
The cut hair should be clean, dry and combed.
–
Put the towel around the neck to avoid getting the cut hair under the collar.
–
Use the hair clipper only as intended according to the herewith instructions.
–
ATTENTION:
In order to provide additional protection, it is recommended to install the residual current device (RCD) with nominal residua Power not
exceeding 30 mA. You should contact the professional electrician in this concern.
WARNING: Do not use the device near water, over the bath tube, pool or other water basin.
WARNING: Observe the above mentioned rules in order to avoid burning, electric shock or ire hazard.
Make sure you understood the a/m instructions.
Speciications
The product technical parameters are included at the name plate.
The device is built in II class isolation, it does not require grounding.
ZELMER hair clippers meet the requirements of effective standards.
The device meets the requirements of the following directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electro- Magnetic Compatibility (EMC) – 2004/108/EC.
–
Noise generated by the appliance: 68 dB/A.
–
The product is marked with CE symbol on the name plate.
