Машинки для стрижки Saturn ST-HC7389 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Accessories
5
A. Professional cutting head made from
stainless steel (width 38 mm).
B. Side catches for removing attachments.
C. On/off switch.
D. Charging display (LED). Lights up red
when charging and green when it is fully
charged.
E. Socket for plugging into the charging
unit or connecting the power supply unit.
F. Charging unit.
Accessories
1. T-Blade
2. U-Blade
3. Detail trimmer
4. Shaver
5. Nose trimmer
6-11. Six comb attachments for to various
cutting lengths (2 to 20 mm), suitable for
both cutting heads.
12. Oil.
13.
Cleaning brush.
14. Scissor
15. Comb
16. Adaptor
Rechargeable battery operation
When operating the appliance with the
built-in nickel metal hydride battery, only
use the power unit supplied for charging.
Check that the voltage indicated on the
type plate of the power supply unit
corresponds to your local power supply.
1 Plug the power cord into the appliance
socket
E
and the power supply unit into
the wall socket.
Notes
l
Charge up the batteries
completely before you use them for the
first time or if you have not used them for
a long time (charging: 7 hours). The
charging display
D
lights up red when
charging and changes to green when it is
fully charged.
l
Charging time is 7 hours when
the appliance is switched off. If you switch
on the appliance while it is charging,
charging will stop. The charging display
D
goes out.
l
The ambient temperature should
be between 5 °C and 40 °C.
l
When fully charged, the appliance
works for around 45 minutes. It is
recommended not to recharge the
batteries after each use, especially if you
do not use the appliance for the full 45
minutes.
l
Charge the batteries at your con-
venience only when they are completely
discharged. This increases their service
life. Avoid charging every day.
Using the charging unit
1). Plug the socket
E
of the appliance into
the charging unit.
2). Plug the power cord into the socket on
the charging unit.
3). Plug the power supply unit into the
wall socket.
Cutting hair
Using the stainless steel Т-Blade
(width 38 mm)
1. If necessary, remove (he attachment
by pressing in both side catches
B
and
lifting off.
2. Insert stainless steel Т-Blade carefully
at the top and press down until it clicks
into place.
