Машинки для стрижки Saturn ST-HC7382 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
STEP 2 - BACK OFTHE HEAD
Change to the next longest comb at-
tachment 9mm or 12mm and cut the
back of the head (see diagram 2).
STEP 3 - SIDE OF THE HEAD
Change to one of two shorter combs
3mm or 6mm, trim sideburns, i.e. the
hair directly in front of the ears. Then
change to one of the longer combs
9mm or 12mm, and continue to cut to
the top of the head (see diagram 3).
STEP 4 - TOP OF THE HEAD
1.
Using comb attachment 9mm or
12mm, cut top of head from back to
front against the direction, in which
the hair normally grows (see diagram
4). In some cases, this may require
the reverse, or cutting from front to
back.
2.
Comb attachments 3mm or 6mm
are used to achieve a close crew cut
or short cut.
3.
For longer hair on top, use the
comb provided and lift hair on the top
of the head. Cut over the comb, with
the hair lifted or hold the hair between
the fingers to lift it and cut it to de-
sired length (see diagrams 5 and 6).
Always work from the back of the
head. You can cut the hair shorter
gradually by reducing the space be-
tween the comb/fingers and the head.
Comb out trimmed hair and check for
uneven strands.
STEP 5 - THE FINISHING TOUCH
1.
Finally, use the taper lever with-
out an attachment comb for close
trimming around the base of the neck,
the sides of the neck and the ears.
2.
Press the clipper at right angles to
the head, tips of the blades lightly
touching the skin and work down-
wards. This way you will obtain a
clean cut, as would be given by a ra-
zor.
