Philips QT4070 - Инструкция по эксплуатации - Страница 9

Absorbing cut hairs 

The vacuum system is activated automatically as soon as you switch on the 

appliance. It absorbs cut hairs during ever y kind of use, i.e. trimming with 

and without trimming comb and contouring.

We advise you to empty the hair-collection chamber after each trimming 

session. When you trim long, dense beards, it may also be necessar y to 

empty the hair-collection chamber during the trimming session in order  

to maintain optimal suction performance (see chapter ‘Cleaning’, section 

‘Hair-collection chamber’). 

Note: To ensure optimal functioning of the vacuum system, do not cut off more 

than approx. 7mm of your overall beard length at a time. If you want to cut 

your beard shorter, repeat the process one or more times. 

Travel lock (BT7085/QT4070 only)

You can lock the appliance when you are going to travel. The travel lock 

prevents the appliance from being switched on by accident. 

Activating the travel lock

 1 

 Press and hold the on/off button for at least 6 seconds.

,

The display counts down from 3 to 1. Then the travel lock indicator 

appears on the display to indicate that the appliance is locked.

Deactivating the travel lock

 1 

 Press and hold the on/off button for at least 6 seconds.

,

The display counts down from 3 to 1. Then the travel lock indicator 

disappears from the display to indicate that the appliance is unlocked.

Note: The travel lock is deactivated automatically when you connect the 

appliance to the mains.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive liquids 

such as alcohol, petrol or acetone to clean the appliance. 
Do not immerse the appliance in water or any other liquid, nor rinse it 

under the tap.

ENGLISH

9