Philips QT4015/15 - Инструкция по эксплуатации - Страница 5

general

 - The appliance is equipped with an automatic voltage selector and is 

suitable for mains voltages from 100 to 240 volts.

 - The adapter transforms 100-240 volts to a safe low voltage of less than 

24 volts.

Charging

Charge the appliance fully before you use it for the first time.

It takes approximately 1 hour to fully charge the appliance.

When it is fully charged, the appliance has a cordless operating time of up 

to 60 minutes. 

Note: You can use the appliance cordless as well as connected to the mains.

 1 

 Make sure the appliance is switched off.

 2 

 Insert the appliance plug into the appliance.

 3 

 Put the adapter in the wall socket.

,

The charging light starts to flash green to indicate that the appliance 

is charging. 

,

When the battery is fully charged, the charging light lights up green 

continuously. After 30 minutes, the charging light goes out. 

 4 

 After charging, remove the adapter from the wall socket and pull the 

appliance plug out of the appliance. 

Battery low

When the batter y is almost empty (when there are only 5 or fewer 

trimming minutes left), the charging light flashes orange. 

Optimising the lifetime of the rechargeable battery

When you have charged the appliance for the first time, we advise you to 

use it until the batter y is completely empty. Continue to use the appliance 

until the motor almost stops running during a session. Then recharge the 

batter y. Follow this procedure at least twice a year. 

Using the appliance

Always comb the beard and/or moustache with a fine comb before you 

star t trimming.

When you trim for the first time, be careful. Do not move the trimmer 

too fast. Make smooth and gentle movements.

English

5