Машинки для стрижки Philips QC5099 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Clean the cutting unit with the brush supplied (Fig. 9).
5
Also clean the inside of the appliance with the brush supplied.
6
Place the lug of the cutting unit into the slot and push the unit back
onto the appliance (‘click’) (Fig. 8).
This appliance does not need any lubrication.
Replacement
A worn or damaged cutting unit should only be replaced with an original
Philips cutting unit.
Push the middle par t of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance (Fig. 7).
Place the lug of the new cutting unit into the slot and push the unit
back onto the appliance (‘click’) (Fig. 8).
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an oficial collection point for
recycling. (Fig. 10)
The built-in rechargeable batter y contains substances that may
pollute the environment. Always remove the batter y before you
discard and hand in the appliance at an oficial collection point.
Dispose of the batter y at an oficial collection point for batteries. If
you have trouble removing the batter y, you can also take the
appliance to a Philips ser vice centre. The staff of this centre will
remove the batter y for you and will dispose of it in an
environmentally safe way.
Disposal of the battery
Only remove the battery if it is completely empty.
1
Disconnect the appliance from the mains and let the appliance run
until the motor stops.
Open and remove the cutting unit (see chapter ‘Cleaning’).
-
-
-
-
English
10
